Posts Tagged ‘1959 US Grand Prix’

Jack Brabham from Bruce McLaren: a works Cooper T51/Climax 1-2 seemed likely for much of the race (MotorSport)

A thrilling race of course, Bruce McLaren took an historic win – as the youngest ever F1 championship GP winner, a title he held for yonks – after Jack Brabham’s Cooper T51 Climax ran out of juice on the last lap. Jack was fourth, Maurice Trintignant, Cooper T51 Climax was second and Tony Brooks, Ferrari Dino 246 was third.

Just before the off, Harry Schell, Jack Brabham and Stirling Moss all aboard Cooper T51s on the front row; Harry controversially so as he had taken a short cut during qualifying! #6 is Maurice Trintignant’s Walker T51, #2 Tony Brooks’ Ferrari Dino 246 (MotorSport)

The Americans entered F1 etc – Indy being part of the F1 World Championship from 1950-1960 duly noted – but the interesting thing was the mix of cars. Not just Rodger Ward’s utterly nuts and utterly wonderful, Kurtis Kraft Offy, but also Fritz d’Orey’s Tec-Mec F415 Maserati, Allesandro de Tomaso’s Cooper T43 OSCA Streamliner and Bob Said’s Connaught C-Type Alta.

(MotorSport)
(MotorSport)

Fritz d’Orey in the one-off Valerio Colotti designed, Gordon Pennington owned Tec-Mec F415 Maserati at Sebring during practice.

Remember those days before carefully homogenised and pasteurised, hermetically clean and certified absolute sameness and dull-shit-boredom. Where did it all go wrong? See here for a story on this car: https://primotipo.com/2024/03/11/tec-mec-f415-maserati/

(MotorSport)

De Tomaso’s works Officine Specializate Costruzione Automobili entered Cooper T43 OSCA 2-litre was only ever going to be an also-ran given the modest displacement and endurance background its twin-cam, Weber fed four-cylinder engine. He qualified the car 14th on the 19 car grid and completed 14 laps before brake troubles intervened.

The car’s swoopy, beautifully finished and fitting body is far more attractive than any of the Coopers of that era, and more aerodynamically efficient? While said to be a Cooper T43, the chassis may be a copy, the wheels are also of De Tomaso’s design and manufacture. An interesting experiment, what became of the car?

(MotorSport)
(MotorSport)

It made great commercial sense for the organisers to run the reigning Indy 500 champion, Rodger Ward, in the race. If you believe the hype, Ward thought his lightly modified Kuris Kraft Midget would give the ‘European Buggies’ a run for their money.

Jack Brabham related to Doug Nye, “The next day he, Bruce, and and I arrived together at the first corner of the track, and just as we jumped from brake to throttle pedal and streaked away from him he was astonished. To his credit he took it well.”

Ward’s qualifying time was well short of pole-sitter Stirling Moss in Rob Walker’s Cooper T51 Climax: 3 min dead vs 3 min 43.8 sec. Rodger lasted for 21 of the race’s 42 5.2-mile laps, getting as high as ninth as others retired, before clutch failure intervened.

A popular racer and a good sport, he became a Cooper convert overnight and worked on Jack and John Cooper to convince them to run a car at Indianapolis. After the 1960 US GP Jack ran his GP Cooper T53 Climax at Indy in a series of tests, aided and abetted by Ward; Coopers participation in the 1961 500 with a Climax powered Cooper T54 changed Indy history, and Rodger Ward played a key role.

(MotorSport)

Ward’s 1946 Leader Card Kurtis Kraft Midget, chassis #0-10-46 was powered by a 1.7-litre, DOHC, two-valve Offenhauser engine that gave away heaps of performance to the mainly 2.5-litre competition. It had a two-speed gearbox, a two-ratio rear axle, hand-disc-brakes and the usual other dirt-track accoutrements! Those Halibrand wheels are 12-inches in diameter and Firestone provided the tyres.

The beam front axle is sprung by a transverse leaf and located bt two radius rods. I’ll take your advice on shock-absorbers. Note the front discs, nerf protection in front of the rear wheels and high standard of preparation and presentation.

(MotorSport)

Jesse Alexander observed the following about the Kurtis Kraft in his Sports Cars Illustrated meeting report.

“The greater part of the two practice sessions was spent getting the car to run properly on Avgas (rather than the usual methanol). The several times that it did appear on the circuit it was obvious that the few modifications to the chassis to suit it better for road racing were worthwhile. Surprisingly stabile and getting through many of the corners as fast (in some cases faster) as much of the field.”

“The red and white Offy differed from normal midgets in having its engine fitted several inches farther forward in the chassis as well as having a supplementary 2-speed transmission installed. This meant that actually there were two 2-speed units, one behind the engine and the other in unit with the final drive gears. But these alterations could never possibly make up for the displacement gap between the parky Midget and her overseas competitors.”

“Rodger Ward deserves credit for his spirit and enthusiasm – it was great to see him at Sebring and lets hope it won’t be the last time out for an Offy-engined car.”

I wrote about the Valerio Colotti designed Giuseppe Console built Tec-Mec F415 Maserati – ‘the ultimate expression of the Maserati 250F’ – a while back, see here: https://primotipo.com/2024/03/11/tec-mec-f415-maserati/comment-page-1/

By late 1959 the car was owned by Florida man Gordon Pennington, he decided to enter the machine for its one-and-only race at Sebring.

With Brazilian wealthy-journeyman Fritz d’Oley at the wheel, the new car, being run for Pennington and D’Oley by the Camoradi Team, managed to qualify 16th, one grid-slot in front of the only 250F in the race driven by Phil Cade.

The Tec-Mec completed 7 laps before an oil leak forced Fritz’ withdrawal, while Cade didn’t take the start given the old-gal’s lack of pace: 3 min 39 sec in qualifying. While Tony Brooks’ front-engined Ferrari Dino 246 was third, and the Dinos raced on into 1960, Ferrari wheeled out a mid-engined prototype at Monaco that year.

Fritz d’Orey, Tec-Mec F415 Maserati during the race. “The Tec-Mec was never driven quickly enough to show up any defects. The only time we know of it being driven fast was when Jo Bonnier took it around the Modena Autodromo last summer. His comments were not all that favourable. He complained of, among other things, a flexing chassis.”

Fritz d’Orey, Tec Mec F415 on the hop (MotorSport)
Bob Said in the Connaught C-Type Alta. Unusual and attractive body, Dunlop alloy wheels (MotorSport)

A bit like the Tec Mec, the Connaught C-Type Alta (chassis #C8) was also stillborn.

Rodney Clarke’s spaceframe chassis, disc braked, strut/De Dion tube rear suspension, double wishbone front suspension, Alta DOHC, two-valve four powered, Wilson pre-selector ‘transmissioned’ vast improvement of Connaught’s successful B-Type was tested but unraced when the assets of Connaught Engineering were sold in 1957.

Passed in at the auction, #C8 was later sold to Paul Emery (of Emeryson fame) and “keen amateur racing driver John Turner”. They soon did a deal with American driver, Bob Said, to race the car at Sebring.

Inevitably, shipping delays meant the project was knee-capped from the start. Poor Said had little testing time, with fuel injection difficulties adding to the challenge. He qualified the car a great 13th in the circumstances but had clutch problems in the race and then crashed it when he was caught out by the Alta engine’s erratic throttle response without completing a lap.

Jesse Alexander wrote, “The Connaught with Bob said driving drew many interested onlookers. This was the first racing appearance of the space-framed car that was under construction back when Connaught decided to cease building and racing cars. They never sold this one, which embodies many novel design features like a telescoping de Dion tube and servo-operated Lockheed disc brakes. Paul Emery got it running well enough for Said to turn a 3:27.3sec practice lap.”

Connaught C-Type #C8 in-build at Send. Note Alta engine and spaceframe chassis which looks very torsionally stiff in this photo and the one below. Double wishbone IFS and bespoke? uprights. Who are they folks? (W I’Anson Ltd)
Dunlop wheels, diff clear but not the strut/De Dion arrangement. It all looks thoroughly modern and light, Wilson pre-selector box more weighty (W I’Anson Ltd)

While outside the scope of this article, the car was repaired back at the Send factory, near Guildford. With six inches added to the wheelbase, cut-down bodywork, a push-bar, and the Alta fuel injected engine tuned to 260bhp on methanol, Jack Fairman attempted unsuccessfully to qualify the car for the 1962 Indianapolis 500.

It’s such a shame this Connaught didn’t contest Grands Prix in 1957 as planned…

C8 was sold via a Road & Track ad and then lived in a private California museum from late ’62 until 1974 when Rodney Clarke repatriated the car to the UK. In another Tec Mec similarity, the car has been an historic racing front runner for decades, initially in Indy LWB spec and since the late 1990s in its original GP specifications.

Stirling Moss in the Walker Cooper T51 in front of the seventh placed Harry Blanchard’s Porsche RSK and Taffy Von Trips’ Ferrari Dino 246, sixth (MotorSport)

Stirling Moss’ Rob Walker Cooper started from pole but was out after only five laps with Colotti gearbox failure.

Alf Francis had modified the rear suspension from the standard Cooper transverse leaf setup to coil springs and ‘wishbones’ as shown in the shot below.

Jesse Alexander explains, “The new rear suspension had been tried out in the Fall back in England. Stirling liked its feel, then proved it by bettering the Goodwood lap record. Wire wheels at the rear, and the Colotti five-speed transmission were the only major differences bwtween the Walker cars and the works cars of Brabham and McLaren.”

(MotorSport)
(MotorSport)

Bruce McLaren – with Jack in front of him – demonstrates the geometry of the standard T51 transverse leaf layout (at Sebring) where said spring performs that task, and locational duties. The 1960 Cooper Lowline (T53) quickly concocted by Messrs Cooper C, Brabham, McLaren and Maddock after the first race of the year, included among its successful bag-of-tricks a coil sprung rear end.

(MotorSport)

McLaren enroute to victory above. Alexander tells us that Brabham had initially practiced this car but “it had experimental settings for 1960” and Jack didn’t like the feel of it, so he and Bruce swapped chassis. “McLaren had not even expected to race at Sebring when I spoke with him in England in October. He expected to be in New Zealand for Christmas and participate in their Grand Prix. As it turned out, Masten Gregory’s injuries failed to heal in time for him to race at Sebring and Bruce replaced him.”

Didn’t fate play a couple of hands in Bruce’s favour!

(MotorSport)

Credits…

MotorSport Images, Jesse Alexander in Sports Cars Illustrated March 1960 via Stephen Dalton’s archive, William I’Anson Ltd

Tailpiece…

(MotorSport)

Just luvvit…

Finito…

Fritz d’Orey in the Sebring pits, US GP December 1959 (MotorSport)

The ultra-light, disc-braked Maserati 250F-engined TecMec F415 was the ultimate development of the long line of 2.5-litre front-engined Maserati 250F Grand Prix cars which commenced in 1954; the preceding 2-litre Maserati A6GCM F2/Grand Prix machines of 1952-53 are duly noted.

In 1957 the works team’s Piccolo 250Fs took Juan Manuel Fangio to his record-setting fifth and final world title. Soon after, with the company on its financial knees, Maserati withdrew from racing. In the best of Italian traditions it wasn’t quite a final withdrawal. In the 1958 French Grand Prix, a special lightweight 250F appeared for Fangio in what became his his final race appearance. He was fourth, and with that the Maserati works-team was no more.

The team’s chassis and transmission engineer during the latter 250F years was ex-Ferrari man Valerio Colotti (1925-January 19, 2008). As the Cooper mid-engined ascendancy began he had a new super-lightweight 250F on his drawing board. Colotti left Maserati to form his own Studio Tecnica Meccanica in Modena.

Georgio Scarlatti, Maserati 250F during the 1959 French GP at Reims, Q21 and eighth (MotorSport)

Racer, Giorgio Scarlatti approached Colotti with a view to building the ultimate 250F. Valerio set to work, fabricating a light, multi-tubular spaceframe chassis made of small diameter steel tube. He scrapped the De Dion rear rear suspension, replacing it with an independent transverse top leaf-spring and lower wishbone set up. At the front was a very un-Italian pair of Alford & Alder uprights, supported by upper and lower wishbones and coil/spring damper units, an adjustable roll-bar was incorporated. Girling discs replaced the 250F’s finned drums but the wheels remained passé Borrani wires. Scarlatti provided an ex-works 2.5-litre six-cylinder engine.

Giuseppe Consoli, an ex-works mechanic, built the car for Colotti, working in the living room of his house near Modena’s aerautodromo. When workshop space was later made available the embryo Tec-Mec F415 was wheeled out through Giuseppe’s French windows!

The car was clad in a functionally attractive, tight fitting aluminium body, the height of which was constrained a bit by the relatively tall Maserati 270bhp, DOHC, two-valve, triple-Weberised six-cylinder engine.

(Colotti)
The Tec-Mec F415 shortly after completion, date and workshop unknown (Colotti)
Testing times, the boredom is palpable! (Colotti)

Bonhams wrote that, “In the meantime Hans Tanner, Swiss motoring journalist and entrepreneur, became involved with the project. He had been on the Modenese scene for years and was close to Maserati. He enlisted backing from Floridan racing enthusiast Gordon Pennington who lived then in Modena’s famous Hotel Reale.” Pennington intended to race an Italian car so Scarlatti sold him his interest in the Tec-Mec project.

Colotti, meanwhile, had gone into partnership with former Stirling Moss mechanic Alf Francis as ‘Gear Speed Development SpA’, with plans to build Colotti transaxles as the mid-engined revolution popped, and so too the demand for quality, reliable gearboxes.

While all of this played out, Consoli completed Tec-Mec in 1959, complete with engine #2523 purloined from a 250F Jo Bonnier had for sale.

“Under the Pennington-Tanner aegis, Studio Tecnica Meccanica changed its name to Tec-Mec Automobili. The car was tested at Modena by American driver Bob Said, Piero Drogo, Jo Bonnier and Scarlatti.”

Just like the front-engined Scarab and Aston Martin DBR4 programmes, this one was too late. The basically 1957-designed Tec-Mec became raceworthy in late 1959 just as Jack Brabham clinched the first World Championships for a mid-engined car aboard the Cooper T51 Climax 2.5 FPF.

Fritz d’Orey during the 1959 British GP at Aintree. Maserati 250F, Q20 and DNF accident (MotorSport)

The 1959 World Championship closed with the United States Grand Prix at Sebring, Florida in December. Given it was in Gordon Pennington’s ‘back yard’ the Tec-Mec F415 was entered for Brazilian amateur – and former 250F racer – Fritz d’Orey. He qualified the Camoradi team run car 17th of 19 starters but retired after seven laps with an oil leak/engine failure.

Jesse Alexander wrote this comment about Fritz d’Oley’s performance in the car in his Sports Cars Illustrated race report. “The Tec-Mec was never driven quickly enough to show up any defects. The only time we know of it being driven fast was when Jo Bonnier took it around the Modena Autodromo last summer. His comments were not all that favourable. He complained of, among other things, a flexing chassis.”

More about D’Orey here: https://www.f1forgottendrivers.com/drivers/fritz-dorey/

One race in-period only, D’Orey and the Tec-Mec at Sebring (MotorSport)

After repair, the car was taken Daytona Speedway for a record attempt but D’Orey was injured in another car. Then Pennington lost interest and the project was abandoned. The car lay on a trailer in a Miami garden until early 1967 when it was acquired complete with spares – including unopened boxes of new parts – by Tom Wheatcroft for what became The Donington Collection.

After restoration he drove the car regularly in open test days at Silverstone and Oulton Park before crashing it heavily into a parked ambulance after spinning-off at Silverstone. After the car was rebuilt it was driven by engineer/restorer Tony Merrick in VSCC events while residing in the Donington Collection. After sale by Wheatcroft in the 1990s the car has been a formidable historic racer.

Etcetera…

(Colotti)

Tec-Mec F415 – Tec-Mec Project 11 – on its first appearance, perhaps, after its restoration.

(Colotti)
(Colotti)

Credits…

Bonhams, MotorSport Images, Colotti Transmissioni, Sports Cars Illustrated March 1960 via Stephen Dalton, colotti.com

Tailpieces…

Valerio Colotti (Colotti)

Finito…

image

(The Enthusiast Network)

Frank Kurtis, Wally Parks and Ray Brock inspect the ‘D-A Lubricants’ Teams new Kurtis 500H Offy 255 to be driven by Johnny Thompson at Kurtis’ Glendale, California factory on March 24, 1958 …

image

(The Enthusiast Network)

Notable is the independent front suspension which Kurtis believed “although heavier than a tube axle, will provide better traction on the corners and give better control and less tyre wear”. In fact 500H chassis #715 was the only one of Kurtis’ Indycars fitted with Dubonnet trailing arm independent suspension.

This later model Kurtis Roadster also has a ‘full-laydown’ and ‘offset’ 255cid 360bhp Offy to lower the cars profile and put more weight to the inside of the car, trends Kurtis started in 1952. The 500H was radical for its day and was widely reported upon in various magazines as here in Motoring Life.

k 500h

Frank initially laid down the Cummins diesel in 1952, tilting the Offys fitted to the other two roadsters that year by 36-degrees from being straight in the frames.

Although he wanted the Offy ‘flatter’, Meyer Drake didn’t make the internal changes to the engine to allow that logical change. This feat was achieved by George Salih, a former Meyer Drake employee who built and modified an engine with Meyer Drake’s assistance which was fitted to a Quinn Epperly built chassis to suit in 1957, setting a new trend.

The 1958 500 was won by Jimmy Bryan’s Salih Offy, Johnson’s Kurtis Offy (in color below) started from grid 21 completing only 52 laps.

Thomson, one of the best drivers of the era, was innocently involved in a massive 15-car lap one crash which killed Pat O’Connor. He continued with bent front suspension, but tyre wear and handling and steering problems forced his retirement in a tragic race.

Chassis #715 raced at Indy in 1959 driven by Duane Carter and in 1960 by Don Freeland for seventh place and a withdrawal respectively. Smokey Yunick bought and entered the car for Carter, converting it to a conventional beam front axle setup. ‘Twas a pity as the IFS was never really sorted, appropriate testing and development never really gave the car the chance it deserved in its original form. The car still exists, albeit in beam axle spec, it was restored in 2007.

image

(unattributed)

Thomson had a very successful 1958 season, he won four of the thirteen championship races at Springfield, DuQuoin, Syracuse and Sacramento, all were in the team’s Kuzma Offy on dirt. He was third in the USAC Championship behind Tony Bettenhausen and George Amick.

Johnny was killed in a sprintcar race at Allentown , Pennysylvania in September 1960, his car crashed and flipped into Allentown Fairgrounds infield.

kurtis

Factory 1948 Kurtis 1000 chassis #316 Offy which was ninth in the 1948 Indy 500 driven by Tommy Hinnerschitz, the Eastern Sprintcar champion. Fantastic shot of the well back, aluminium crankcase, iron block, 500 pound Offy 270cid/325bhp @ 5500rpm engine, spaceframe chassis, its 1948 remember. Made of ‘4130’ chrome-moly steel tube, beam front axle not so pretty from a road-racing perspective, but these were dual purpose dirt and pavement cars, drum brakes and fuel all carried up the back. Quite a thing of beauty (Offenhauser)

Frank Kurtis is best remembered for his all-conquering midget and Indy racers, but he also built sprint cars, sportscars, quarter midgets and karts…

The United States boomed in the late 1940s after recovery from the Great Depression and World War II. The racing world reflected better economic times, in 1942 the Indy 500 was canceled after the government banned motor racing. Restored after lack of use, the first postwar Indy in 1946 was a box-office-smash. Many new and innovative cars took to the track, among them Kurtis racers, the first of which appeared in the mid 1930’s.

image

Undated shot of a staged Kurtis Midget production line, for a time he was building a car a day! Kurtis built more of the things than any other manufacturer (Frank Curtis Collection)

image

Huge field of Midgets on lap one of a race at Mineola Fairgrounds, Nassau County, New York on 23 August 1948. This venue used from 1925 to 1949 (Racing One)

Frank Kurtis, a native of Crested Butte, Colorado was born on January 25, 1908. He moved with his Croatian born family – his real name was Kuretich – he was one of eight children, to Los Angeles in 1922. He began building cars as a youngster at his father’s blacksmith shop in Pueblo, Colorado which repaired cars and horse-drawn buggies. It was Frank’s talented father who instilled precision craftsmanship into the youths psychy.

His first car was a T-Model Ford to which he added a special body. In the early 1920’s Kurtis began his car making apprenticeship with Don Lee Coach and Body Works, the local Cadillac dealer, broadcaster and racer nut who built custom cars for Hollywood stars. Father and son both worked at Lee’s, Frank improved his welding and metal shaping skills building some quite exotic car bodies.

image

The beautiful rail-frame midget on the right, known as the Jewel Box was built by Kurtis for Charlie Allen and driven, and later by owned, Roy Sherman. The guy between the two frame-rail midgets being built is Kurtis’ Ted Halibrand, later famous for his alloy wheels (unattributed)

Kurtis’ first work on a racing car seems to be the construction of a one-off radiator shell for a roadster run at Jeffries Ranch, a half-mile dirt track at Burbank, California. Work on the Atlas Chrome Special and Stagger Valve Fronty Ford followed.

Frank’s first complete Midget was built for Tommy Lee, Don’s son in 1936. A succession of cars followed including the Jewel Box Offy and other Midgets for Charley Allen, Lou Fageol, Rex Mays, Bob Swanson, Roy Sherman, Ted Halibrand and others.

image

Bill Schindler’s Mike Caruso owned Kurtis Black Deuce Offy won 53 races in 1947 and 1948, taking the American Drivers Club title in 1948. Kurtis set a styling trend which continued for decades if not today (Racing One)

Post war, by 1946, he was building an assembly line of Offy engined midgets. Watching pre-war midgets bucking and bouncing through the turns, he thought their centre of gravity was too high and suspensions too stiff, his racers points of difference addressed these ills.

Frank’s chassis were stiff spaceframes made of ‘4130’ chrome-moly tube rather than the sheet steel rail-frames of his earlier cars and those of most of the competition. The suspension used torsion bars which reduced unsprung weight and allowed better road holding. He used Dzus fasteners which allowed the body to be removed in minutes, which meant the Offy could be serviced more quickly between events. The cars were lower and more softly sprung which made his chassis easier to handle and gave superior traction so the powerful Offy’s could put all their horses to the dirt. He built hundreds of them.

The Midget craze was dying by 1948, race fans were losing interest in the smaller cars, being attracted by bigger Champ Cars and Kurtis was there to service that market…

image

Walt Faulkner in his JC Agajanian Grant Piston Rings 1948 Kurtis 2000 Offy 220 at the California State Fairgrounds on 15 October 1950. He is contesting an AAA Sprint/Champcar race, note the difference in size compared with the various Midget photos (Racing One)

image

Johnny Parson’s Kurtis Offy 270 1950 Indy winning chassis. The car had no type designation but was built in 1948/9 and called Kurtis Kraft Spl . Parsons was second the year before in the same car (unattributed)

In 1949 a Kurtis-Kraft dirt car won the AAA title, in 1950 the same chassis driven by Johnny Parsons – the Wynns Oil Spl – won the Indy 500.

In this period Frank built a one of a kind Buick and a production sportscar which was later to become the Muntz Road jet in 1950. More of the sportscars later in the article.

image

The 1951 Indy 500 was won by a stretched-midget built from Kurtis parts supplied to Meyer Drake, the Offy engine manufacturers.

It was allocated chassis # 327-49. Originally powered by an experimental centrifugal-supercharged Offy Midget engine with a capacity of 106.81cid, weighing 280 pounds. So fast was the car, that their customers complained about unfair competition, so Meyer Drake sold it to Murrell Belanger.

It won the 1951 500 in Lee Wallard’s hands with a slightly-undersized 241cid Offy. The engine was a combination 270 block and 220 crank which they managed to squeeze into the chassis designed for the much smaller 107cid blown Midget engine.

image

1951 Indy front row;  Jack McGrath KK 3000 Offy, winner #99 Lee Wallard K Offy and#18 Duke Nalon Kurtis Novi  V8 (unattributed)

image

Lee Wallard Kurtis Offy 241 1951 winner. Stretched-Midget built by Meyer Drake from Kurtis parts (unattributed)

image

Popular Mechanics May 1952 article about the upcoming Indy 500, pic shows the low build of the Kurtis 1952 roadsters

In 1952 Kurtis built three pioneering roadsters (500 Series) with elongated wheelbases and lowered bodywork and centre of gravity.

Popular Mechanics reported that the cars weighed 1500 pounds, the frames were of chrome moly elliptical section tube plus a nine inch deep aluminium sheet box that also served as part of the skin. To save weight, the cowl and firewall were designed as structural parts of the frame. The front suspension system comprised two torsion bars mounted in a crisscross fashion instead of parallel to the frame.

Joe Scalzo, “They showed up at the speedway looking like freaks among all the high bodied dirt track cars and antediluvian front-wheel drives.”

The cars fates varied. The Cummins Diesel was out early with a broken supercharger but its huge, tall 401cid straight-six, with the engine laid on its side, plonked it on pole despite weighing 2150 pounds dry. In so doing Frank Kurtis built the first laydown-chassis Indycar.

The Auto Shippers, an upright roadster (type 500A) didn’t start, but oilman Howard Brighton Keck’s Offy 270 powered Fuel Injection Spl’\ driven by national midget champion, Bill Vukovich, dominated the race before a steering pin failure resulted in a kiss of the wall with 20 miles to run.

Vukovich won in the Kurtis 500A ‘Fuel Injection Spl’ in 1953/4.

image

Vukovich, Jim Travers and Frank Coon after their 1953 500 win, Kurtis Kraft 500A Offy 270. The Offy 270 gave circa 345bhp @ 5500rpm in 1952 on methanol. Fuel rules at Indy were not strictly enforced then, a dose of ‘pop’ – nitro-methane – in qualifying for four or so laps was good for another 40bhp! (unattributed)

Scalzo related the changes needed to make the car competitive. “Arriving…late for its debut, it was immediately hailed a disaster by Howard Keck’s longtime mechanics Jim Travers and Frank Coon…the ‘Toonerville Trolley’ had torsion bars behind the rear axle and in front of the front axle and the anchor points were wrong. It had a vertical steering shaft holding the two steering arms together and its steering geometry was off…the track surface made the out of balance Fuel Inj Spl a flexing spastic. Travers and Coon rescued it with remedial repairs…Jim and Frank were rich in racing savvy and were veterans of weekly Midget brawls at Gilmore Stadium and Culver City Speedway, they were used to tricking out Keck’s stable of 110cid Offys.”

“To overcome the flaws of the Fuel Inj Spl they fell back on old speedway racing habits. Among other things they ‘jacked-weight’ across its rear end, and by deliberately misaligning its 270cid Meyer-Drake by one-bolt and 36-degrees to the bell-housing, wedged hundreds of static pounds to the FI Spl’s left…All this worked like a charm…Additionally, they and colleague Stu Hilborn had a reputation for…making Offy horsepower,” Scalzo said.

image

Vukovich sets off after a pitstop in his victorious Kurtis 500A Offy 1953 run. He won in 1954 but died in the ’55 500 in an accident not of his making (Racing One)

Kurtis cars won the 500 in 1953, 1954 and 1955. For the next eight seasons through to 1963, when Kurtis made his ‘model 500L for lemon-Scalzo’, (the bulbous American Rubber 73 missed the cut) upwards of 60 KK’s raced at Indianapolis. Production numbers of the cars appears as follows; 11 in ’53, 10 in ’54, 6 in ’55, 5 in ’56, 16 in ’57 and 7 between 1958 and 1962.

Scalzo, “The end of Frank Kurtis was sad. A disgruntled and embittered FK turned into an awful grouch pigeonholing Kuzma, Epperly, Lesovsky and especially AJ Watson as thieves who stole all his roadster ideas and became heroes at his expense.”

image

George Bignotti beside his 1960 Indy entry, the Kurtis Seal Fast Spl driven by AJ Foyt, DNF clutch. The ultimate expressions of the roadster trend started by Kurtis were full-lay-downs built by Salih, Epperly, Kurtis and others. Also Watson’s ‘offsets’ built with ‘short-tower’ lower block Offys than the 270’s taken back to 255cid used by others; the regs demanded a 4.2-litre unsupercharged limit from 1957. This car was built as a Kurtis, but for 1960 had an Epperly chassis, body and front end. Offy engine a 255 cid four cylinder, five bearing, monobloc, DOHC four valve, Hilborn injected unit giving circa 350/360bhp @ 6200rpm on methanol, weight 452lbs (The Enthusiast Network)

Frank Kurtis’ Indy track record is to be envied in the extreme. His Offy powered cars sat on the Indy pole eight times, he won five times; in 1950 (Parsons), 1951 (Wallard), 1953/4 (Vukovich,) and 1955 (Sweikert). His cars were also fourth in 1947, third in 1948 and second in 1949 and 1952. Fifteen of the top 20 cars at Indy in 1953 were Kurtis chassis!

The last Kurtis chassis victory in a National Championship event was Van Johnson’s victory at Langhorne on June 14, 1959 in Kurtis Kraft 4000 chassis #368-53.

image

Champion Ad promoting Bob Sweikert’s 1955 Kurtis 500D Offy Indy win

One of the most famous and bizarre Kurtis appearances was Rodger Ward’s entry of a Kurtis Offy Midget in the inaugural F1 US Grand Prix at Sebring in 1959…

Promoter Alec Ullman was chasing bums-on-seats, the entry of Ward, the 1959 Indy champ made commercial sense. Ward had had some road racing success, racing his Midget against sports cars, notably at a Lime Rock meeting during a Formula Libre race.

kurtis ward

Rodger Ward’s Kurtis Offy Midget chasing, and soon passing George Constantine’s Aston Martin DBR2 at Lime Rock, a twisty ‘right hand’ road course on 25 July 1959. Ward beat some of the best sports racers in the country in this F Libre race (Offenhauser)

For the Grand Prix though, his two-speed gearbox, two-speed rear axle, hand braked, supercharged 1.7-litre Offy was at a severe disadvantage to the other front engined F1 cars, let alone the revolutionary Coopers. The Kurtis was chassis #O-10-46, yes folks it was built in 1946! The car raced on 12-inch wheels and Firestone slicks pre-dating their reappearance in F1 in 1971!

Ward qualified last and DNF with clutch failure after 20 laps in the race won by Bruce McLaren’s Cooper T51 Climax after Jack Brabham ran out of fuel on the last lap. His fourth place, pushing the Cooper over the line, gave him the title.

image

Rodger Ward contesting the 1959 USGP at Sebring in his supercharged Kurtis Offy Midget. He won the Indy 500 that year in a Watson Offy 255 Roadster (Louis Galanos)

While the focus of this article is the Indy cars, Kurtis also built some fantastic sports cars…

In 1949 he built the Kurtis Sports Car which featured on the cover of the very first Motor Trend magazine in October 1949. Kit prices started at $1495, inflation drove costs up so much that only 17 kits were sold, Kurtis sold the rights to Earl Muntz in the early 1950’s. Almost 400 of these steel bodied, Caddy/Lincoln engined Muntz Jet’s were built.

In 1953 Kurtis built the 500S, the chassis and suspension of which took its cues from the 500A Indy Roadster. The chassis was a ladder-frame, drilled for lightness, the solid front axle was tubular suspended by trailing arms and torsion bars. A live axle was also used at the rear, again suspended by torsion bars.

The 500S could be supplied as a kit or complete ex-factory, the body was aluminium, and with cycle-guards was aggressively handsome. The complete car sold for $4986 less engine and ‘box. It’s estimated that 30 500S cars/kits were sold from 1953-5.

Bill Stroppe’s short-wheelbase, 282cid ‘flathead’ Mercury V8 powered car was the most successful racer, achieving many wins in 1953/4.

image

Kurtis 500S, 1955 Sebring 12 Hour. The Jack Emsley/Jim Rathman car was out on lap three with Cadillac engine failure. The race was won by the Hawthorn/Phil Walters Jag D-Type (unattributed)

The 500X followed, it was an evolution of the earlier car but with a much nicer spacefame chassis. Although live-axle suspension remained, the rear axle incorporated a Halibrand quick-change unit. Between six and 12 were built (quite a range!) the cars were clothed in a very attractive aluminium body.

The 500M was designed for smaller engines, used a fibreglass body, and the Kurtis 500KK kit chassis pictured below, 18-20 cars were built.

image

In the early 1960’s Kurtis laid down three machines which were essentially widened Indy Roadster chassis. One of these, Jack Lufkin’s 1964 Bonneville Streamliner, was the fastest Kurtis ever, topping 245mph in 1968. Several other racers were built, including a ’62 Bonneville A-Model pickup, a pair of dragsters and a Saab powered H-Modifed car also in 1962.

Kurtis designed and built the start-carts for the Lockheed Corporations SR71 Blackbird, a project which continued into the 1980’s.

Frank Kurtis retired in 1968, but his son Arlen continued the business which diversified into high performance drag racing and water skiing. In more recent times he has built “limited productions of a few models of cars and parts his dad once built.”

Etcetera…

image

The factory Kurtis Kraft ‘1000’ Offy’, 1948 Series Champcar. Powered by ‘270’ Offy. Cutaway from a photo original  (John Wickhart)

image

The 1951 Meyer Drake built stretched-midget built from Kurtis parts is sometimes allocated chassis # ‘327-49’ . Won ’51 Indy fitted with Offy ‘241’ cid engine (unattributed)

image

image

I love this shot as it gives great human-scale to these Midgets and 91 or 110cid Offys. The Kurtis was raced by Don Lowe at left, fettling the car with owner Miles Spickler on June 2, 1949. The upcoming meeting is at Lakeside Speedway, Denver. Offy Midget engines were 100/102 and 110cid in the 1960’s. Iron block, aluminium crankcase, three bearing monobloc – the block and head one unit – DOHC, two-valve, circa 237lbs in weight. Post-war they were fitted with two 1.5 inch Riley carbs and later, Hilborn continuous fuel injection. By 1947 the engine produced 120bhp @ 6000rpm on alcohol and in 1950 injected form 143bhp @ 8000rpm on alcohol (The Denver Post)

image

Kurtis Kraft Offy Speedcar, not sure of date or model. Hilborn injected 110cid engine  (David Kimble)

image

Vukovich, Kurtis Kraft 500A Offy 270, 1954 Indy winner. Vukovich used the same chassis #353-52 in his 1952-54 races (unattributed)

image

Vukovich leads the 1953 Indy 500, Kurtis 500A Offy (Max Staub)

offy 270

Leo Goossen’s factory drawing of the Offy 270 which was the supreme engine in championship racing from 1947-56. This is a later injected version. When the capacity limit was reduced to 4.2-litres the engine capacity was reduced from 274 to 255cid, Meyer Drake simply reduced the internal dimensions of the engine a smidge (Leo Goossens)

image

Bibliography…

Joe Scalzo ‘Indianapolis Roadsters 1952-64’, Popular Mechanics May 1952, Don Capps on The Nostalgia Forum, Gordon Eliot White ‘Offenhauser’

Photo Credits…

The Enthusiast Network, Racing One, David Kimble, John Wickhart, Frank Kurtis Collection, Louis Galanos, Max Staub

Tailpiece…

image