Posts Tagged ‘1960 Modena Grand Prix’

monaco 1958

Quite a stunning 1960 Monaco Vista…

I was trawling the internet, as i do, looking for the photos which inspire the articles i create, one of the reasons why this blog is so nuttily diverse is to do with that approach.

I found this shot, unattributed as most of them are, but saying ‘Monaco 1966’ which it most definitely is not!

Its one of those ‘the more you look, the more you see shots’; the steam train, four nurses sitting together, the working port, none of your fancy-schmancy big yachts of today and of course the car itself!

Thats the tricky bit; its not sharp in focus but i think it might, might be Luigi Musso’s #34 Ferrari Dino 246 in the ’58 race.


GP debutant Richie Ginther on his way to 5th place in the Ferrari Dino 246P ‘008’, Monaco 1960. (unattributed)

Since posting this shot reader Grant Perkins has done some research and confirmed the photo is actually of Richie Ginther at Monaco in 1960 in the Ferrari Dino 246P…

Stirling Moss won the race in Rob Walker’s Lotus 18 Climax, Chapman’s first championship win as a manufacturer, from Bruce McLaren’s Cooper T53 Climax and Phil Hill’s Ferrari Dino 246.

The shot is historically significant as Ginther made his GP debut that weekend and his mount, the Ferrari 246P, the Scuderia’s first mid-engined racing car, competed for the first time.

Monaco 1960 is also significant for the long awaited but far too late appearance of Lance Reventlow’s Scarabs. These superbly engineered but heavy, unwieldy front engined cars entered GP racing just as Ferrari, the last team racing a front-engined car experimented with its mid-engined replacement. A tangent too far for this article but an interesting topic for another time.


Monaco 1960. #46 Chuck Daigh and #48 Lance Reventlow Scarab’s #34 Ginther’s Ferrari 246P. (Dave Friedman Collection)

Ferrari built the 246P in secret, it was tested at Modena by Hill, Ginther and factory tester Martino Severi on 22 May, the design perceived by its drivers to have too much weight at the rear causing the nose to lift under acceleration.

Despite the fact that a Cooper won their first Grand Prix in Argentina in 1958, in Moss’ hands and Jack Brabham’s Cooper win in the 1959 World Championship was the first for a mid-engined car and further that Ferrari’s front engined Dino’s were struggling to keep up, Carlo Chiti had to fight hard to build a mid-engined prototype.

Ferrari’s conservatism was proven time and again over the years, they were not often innovators or early adopters, some examples; the change from drum to disc brakes, wire wheels to alloys, carburettors to fuel injection, ladder frame to spaceframe chassis, spaceframe chassis to monocoque and so on.

Fortunately the car, allocated chassis number ‘246-0008’, showed enough promise to race at Monaco on 29 May. By the end of the year ‘0008’ had morphed from a prototype 2.5 litre F1 car into a 1960 1.5 litre F2 ‘156’, becoming an F1 156 with the GP rule change from 2.5 to 1.5 litre engines from 1 January 1961.

‘008’ became Giancarlo Baghetti’s race chassis for 1961 and part of the amazing start to his F1 career; the Italian famously winning his first 3 GP’s; Syracuse, Naples and finally the French GP, in so doing Giancarlo became the only man to ever win his first championship GP.

So ‘0008’ won the first of many GP’s the 156 design took in 1961 on its way to dual World Titles; the Drivers and Manufacturers in 1961.

Their isn’t a happy ending for the chassis though, Giancarlo spun out of the wet British GP at Aintree a week after his Reims win doing enough damage to ‘0008’ that it was scrapped…mind you, Ferrari famously destroyed all of the 156’s at the end of the 1962 season when the cars were as uncompetitive as they had been fast the year before.

From mid-engined 2.5 litre F1 prototype at Monaco on May 6 1960 to 1.5 litre F1 winner at Syracusa on 25 April 1961, ‘0008’s story is a short but historically significant and interesting one.


Enzo Ferrari and the Ferrari 246P designer, Carlo Chiti, watch Martino Severi testing their first mid-engined car ‘246-0008’ at Modena May 1960. (unattributed)



Phil Hill testing the Ferrari 246P at Modena 1960, the suburb oh-so-close to the circuit! Compare the body of ‘0008’ here with its Italian GP spec. (unattributed)

1960 Monaco Grand Prix…

Ginther qualified the new car 9th, between the front engined Dino’s of Von Trips 8th and Phil Hill 10th. In the race Hill was 3rd, Richie 6th and Von Trips 8th but not running at the finish.

ginther monaco

29 year old Richie Ginther makes his GP debut at Monaco 1960. Ferrari 246P. (Dave Friedman Collection)



Ginther’s new developmental mid-engined Ferrari Dino 246P-0008 #34 beside the conventional front-engined 3rd placed Dino 246 of Phil Hill at Monaco in 1960. Difference in size not that great at this stage. Some sources say Ferrari acquired a Cooper to understand that cars packaging and suspension geometry ‘tricks’. (unattributed)


fazz zand

Ferrari 246P in the Zandvoort pitlane 1960. (unattributed)

The team took the 246P to Zandvoort for the following Dutch GP

However, the engine, which had not been rebuilt was burning and blowing so much oil that it was unraced.

Ginther ran a conventional front engined Dino as did his teammates, they were comprehensively blown off by large numbers of Lotus and Coopers, Ginther in 12th was the quickest Ferrari qualifier- Von Trips was 5th, Ginther 6th and Phil Hill retired with engine failure on lap 13.

The race was won by Jack Brabham’s Cooper T53 Climax on the way to his second title on the trot.


Cars being marshalled before the start of the Dutch GP on June 6 1960. #3  Ginthers Ferrari Dino 246, #5 Alan Stacey Lotus 18 Climax DNF, #12 Bruce McLaren Cooper T53 Climax DNF, #9 Tony Brooks Cooper T51 Climax DNF, #6 Jim Clark Lotus 18 Climax DNF. (unattributed)

Ferrari Dino 246P Technical Specifications…

Whilst ‘0008’ car didn’t race at Zandvoort, photographer George Phillips took some rare shots of a Ferrari too little has been written about, the car practiced with the number ‘3T’.


246P front suspension by upper and lower wishbones, coil spring/koni dampers and roll bar. Disc brakes. (George Phillips)



Chassis ‘Tipo 543’, welded tubular steel, described as ‘Cooper’ in style if not in the quality of the welding! Borrani wire wheels 15 inches diameter, Dunlop tyres 5.25/6.5 inches wide front/rear. Wheelbase 2300mm, track 1200mm front and rear. Fuel capacity 150 litres. Weight wet 452kg. (George Phillips)



Engine ‘Tipo 171’ derived from the Tipo 134. 65 degree, all alloy, DOHC, 2 valve V6. Bore/stroke 85X71mm, capacity 2417cc. 3 Weber 42 DCN carburettors, twin plugs fired by Marelli magneto, dry sumped. 265bhp@8300rpm. (George Phillips)


rear sus

Rear suspension upper and lower wishbones, coil spring/Koni dampers and roll bar. Gearbox ‘Tipo 543’ 5 speed and reverse, LSD, note also the clutch location at the back of the ‘box. You can just see the top of the inboard brake rotor beside the chassis member. (George Phillips)

Development of the 246P and its Evolution into the 156…

Ferrari decided to abandon further development of the 246P as a 2.5 litre GP car and focus their attention on the front-engined Dino’s for the balance of the season and the future 1.5 Litre GP car for the new Formula 1.

The basis of the new 1.5 litre F1 engine was the Vittorio Jano designed 1.5 litre ‘Dino V6’ already used in Ferrari’s front engined F2 car’s which first raced in 1957. Von Trips won the 1960 F2 season opening Syracuse GP in March 1960 in one of these cars, ahead of 2 Coopers.


Taffy von Trips winning the 10th Syracuse GP, 19 March 1960. Ferrari Dino 156. He won from the Cooper Climaxes of Trintignant and Gendebien. (George Phillips)

Chiti progressively modified the engine, initially retaining the 65 degree angle but then changed to 120 degrees, the wide Vee angle has the benefit of the very low centre of gravity and rear bodywork which was as much a styling signature of the 1961 156 as its ‘sharknose’. ‘Definitive’ spec 1961 156’s raced with the 120 degree engine, but the 65 degree was also used. ‘0008’ was always fitted with the 65 degree spec unit.


Taffy von Trips at Solitude in ‘0008’ in 1960. LF wheel off the deck. Ferrari 246P/156, victorious over the Porsches. (unattributed)

The test bed for the new engine was the 246P ‘0008’.

After the car with revised bodywork and 1.5 litre V6 was fitted it was tested at Modena and then entered at the 10th Solitude F2 GP, Germany on 24 July where Taffy von Trips belted the Porsche 718/2’s, a great F2 car on their home ground, the aristocrat lead home Hans Hermann, Jo Bonnier, Graham Hill and Dan Gurney, all in factory Porsche’s.

Further testing and development of ‘0008’ followed. With many of the British teams punting on the Intercontinental Formula for 1961, Ferrari were developing a formidable weapon for the new 1.5 F1, the implementation of which was confirmed, much to the Brits chagrin as they wouldn’t have¬†competititive engines until 1962.

At the Italian Grand Prix at Monza in September Ferrari raced ‘0008’ in what was getting close to the 156’s definitive 1961 specification.

‘0008’ in 1.5 litre F2 form was raced by Taffy Von Trips to 5th place fitted with an auxiliary fuel tank amongst the 2.5 litre GP cars.

taffy front

At the Italian GP in September 1960 Ferrari ran Taffy von Trips in 246P/156 ‘0008’. Both this and the shot below show how much more ‘svelte’ the car became compared its Monaco spec in May…not as small as the best of the British cars mind you, but in ’61 the Brits were hamstrung by lack of suitable/competitive engines. (Archie Smith)

von Trips had the 1.5 ltre F2 class to himself outrunning Hermann’s Porsche 718/2 by a full lap.

Phil Hill won the race, the final GP victory for a front engined car but it was a hollow one; the sneaky Italians decided to have their 1960 race on the combined Monza road course and banking to maximise the chances of the old-tech Fazz’s winning the race- power the Ferrari’s only advantage over the four cylinder Coventry Climax FPF and BRM engined cars. The Brits then told the organisers to ‘jam it’ on safety grounds and most boycotted the event.

taffy rear

von Trips 246P/156 ‘0008’ in the 1960 Monza paddock. Note how much different the rear bodywork is compared with its 246P Monaco spec. (Archie Smith)



Phil Hill’s winning Ferrari Dino 246/60 ‘0007’ # 20 is pushed onto the 1960 Monza grid ahead of von Trips Ferrari Dino 246P/156 ‘0008’. (Archie Smith)


von trips

Taffy von Trips ready for the off, Monza 1960. Ferrari Dino 346P/156. (Archie Smith)

VI Gran Premio di Modena F2 1960…

The final race appearance for the ‘0008’ in 1960 was Ferrari’s home event at Modena on 2 October.

In the same way that Ferrari beat the Porsche’s at Solitude in July so it was that Jo Bonnier’s Porsche beat Richie Ginther in the front-engined 156 from Taffy von Trips in the new 246P/156 suffering from fading brakes.

Hans Hermann was 4th and Edgar Barth 5th, both also driving 718/2 Porsche’s.


1960 Modena F2 GP. Jo Bonnier’s Porsche 718/2 leads #26 Ginther’s front engined Ferrari Dino 156 from von Trips mid engined 246P/156. (unattributed)



von Trips Ferrari 246P/156 F2, #10 Edgar Barth Porsche 718/2, #28 Hans Hermann Porsche 718/2. Modena GP 1960 grid. (unattributed)


trips 2

Taffy von Trips, Ferrari Dino 246P/156 ‘0008’ F2, Modena GP 1960. (unattributed)



The brilliant, portly Tuscan engineer and 246P/156 designer Carlo Chiti explains to von Trips how to get the best from his car. Italian GP, Monza 1960. (Archie Smith)

1961 Beckons…

All of this development work on the new-fangled mid-engined concept was very successful, the 156 was the dominant GP car of 1961.

It took the Constructors Championship for Ferrari and Drivers title for Phil Hill, but lets not forget the role the 246P/156 ‘0008’ and Chiti’s development skills and prodigious work output made in that remarkable transition from the back to front of the grid in less than 12 months.

ferrari 156 cutaway

Cutaway drawing of the Ferrari 156 F2 car ‘0008’ in 1960 trim. Spaceframe chassis, double wishbone & coil spring/damper suspension front and rear. ‘Tipo 188’ 1.5 litre 65 degree, DOHC, 2 valve 2 triple -choked Weber carbed V6 giving circa 180bhp in 1960 spec. 5 speed gearbox, Dunlop disc brakes. (James Allington)


front 2

More detail; von Trips Dino 246P/156 Monza 1960.  (Archie Smith)


butt shot

Ferrari Dino 246P/156 butt shot. Monza paddock, Italian GP 1960. Fairing of the chassis with bodywork of this series of cars, and its aero advantage, superb. (Archie Smith)



Willy Mairesse in his 2.5 litre GP Ferrari Dino 246 tows von Trips 1.5 litre F2 Dino 246P/156 to a good time in the little car, Monza banking. Italian GP 1960. (Archie Smith)



The boss at Monza to both suss his new car and the opposition. Enzo Ferrari, Monza, 1960, car is Barth’s factory Porsche 718/2 F2. (Archie Smith)

Etcetera The First 246 Test Session…

Here are a series of photos from the Getty Archives of the first test day at Modena in May 1960.

Ferrari is present as is Carlo Chiti, the driver in all of these shots is factory test driver Martino Severi. Car is unpainted, perhaps Ginther was not present on day #1.

enzo 1

Ferrari, Severi, Chiti (Getty)


enzo 2

246SP lines clear in this shot, front engined styling on a mid-engined car! Ferrari back to camera (Getty)


enzo 3



enzo 4

Hand formed aluminium panels of the prototype clear as are Borrani ‘knock-ons’ and Dunlop disc brakes (Getty)


enzo 5

The boss looks on and contemplates this big change in the design of his cars, the Scuderia got the hang of it quickly enough! (Getty)

Check out this brief article i wrote about the Ferrari 156 a while back…

Also see this article on Giancarlo Baghetti which covers the 1961 record of both him and 156 ‘0008’ in 1961…

Some great Monaco 1960 Race Footage…

Photo Credits…

George Phillips, Dave Friedman Collection, Archie Smith, Getty Images


F1 Technical, F2 Register,, James Allington cutaway drawing,, Doug Nye ‘History of the GP Car 1965-85’

Tailpiece: Lets Leave Monaco by Train as we Arrived…


(Dave Friedman Collection)