The finalists are off to a flying start in the 6 October 1930 ‘World Championship’ for under 1500cc cars on dirt, Penrith Speedway, Sydney…
The glass plate negative, wonderful monochrome photograph creates such an evocative feel apart from the scene itself. From the outside is John Sherwood’s cumbersome looking Lea Francis O-Type, then the Sam Aggett and Charlie East driven Bugatti T37’s and on the inside Tom Lord’s, Geoff Lowe owned Austin 7 Brooklands. On the very inside verge is Jack Field’s supercharged Lea Francis S-Type Hyper tourer slowing having paced the competitors for a lap before the championships 3 lap journey, East was the winner in his Bugatti.
Event and Competitors…
A record entry of 79 cars was received for the meeting. The winner of the feature event, Charlie East, described as an ‘old hand track and competition driver’, was proclaimed World Champion for cars under 1500cc on dirt tracks.
The 6 entries for this 3 lap race were all rather local notwithstanding the grandiose title of the Light Car Club of New South Wales promoted event, not that there is anything new in promoters ‘puff’ to put bums on seats!
The Nepean Times reported that the race was ‘No mere crow attracting stunt, but a legitimate worlds championship event’. The ‘International Racing Organisation…specified certain electrical timing apparatus, this to be controlled by officials sanctioned by the leading motor body of the state’. The event was supervised by the Royal Automobile Club of Australia, the Confederation of Australian Motor Sport was not formed until the 1950’s.
The Sydney Morning Herald noted Mr TF Lord’s supercharged Austin 7 Brooklands was a new car with Messrs Charlie East and Sam Aggett entering 1496cc (T37) Bugatti’s. Tom Sulman had a career which went all the way from the early 1920’s in the UK to his unfortunate death in a Lotus 11 Climax at Bathurst in 1970, was entered in a 1096cc Salmson.
John Sherwood was a luminary as a driver, businessman, motoring and motorsport administrator down the decades, he entered a 1496cc Meadows 4ED twin-carb powered Lea Francis O-Type. Sherwood was the driving force of the NSW Light Car Club as well as the key individual who created the Mount Panorama track at Bathurst. From a pioneering motoring family, he was a formidable competitor and later, as a Director of Empire Speedways, was a big contributor to the growth of Speedway Racing in Australia.
WH Northam was the final entry in another 748cc Austin, a combination which had many wins at Penrith and who later raced to 6th place in the 1932 Australian Grand Prix aboard this car. Bill Northam had an extraordinary life of achievement in commerce, sport and as a charity fund raiser. Long after he stopped motor racing he took up yachting in his mid-forties making the Australian Olympic Team and winning the Gold Medal in the 5.5 metre class at the Tokyo 1964 games. He was knighted in 1976 and died, aged 83, in 1988.
Other races on the ‘Eight Hour Day’ Monday public holiday card were an all powers handicap over 5 miles, a handicap for under 850cc cars over 3 miles, a four mile scratch race and finally the NSW LCC handicap over 3 miles.
The Championship Race…
Four starters took the flag with Sulman and Northam knocked out in eliminations conducted over 1 lap, a mile, with each car having a flying start. Aggett was the fastest qualifier at 66.91 mph from East, Lord, Sherwood, Sulman and Northam the slowest on 60mph.
The racers were given a rolling start behind JA Fields Lea Francis, then East immediately took the lead in his Bugatti from Lord’s Austin, then Aggett’s Type 37 and Sherwood’s Lea Francis ‘handicapped by a cumbersome body’, ‘Sherwood’s Lea Francis could not be opened up except in the back stretch’ in 4th. East drew away to a lead he never relinquished, and led Aggett by 100 yards from Lord. East’s lead stabilised at about 400 yards from Aggett, who was handicapped by an oiled plug, Lord was 100 yards further back and then Sherwood last.
In the final quarter of a mile Lord and his little supercharged Austin seized an opening through the dust, coming alongside Aggett’s Bugatti in 2nd. ‘Aggett swung a trifle wide on the last turn onto the home stretch, and, straightening up, cut down to the inner edge of the racing course. The two cars touched with the Austin spinning wildly. ‘Lord’s car spun on its side, dragging the driver, who was half out, and half in the Austin. Lord sustained abrasions to his legs and face. Charlie East one of the Maroubra stars, won in a time of 2 minutes 33 seconds at 70.58 mph by 100 yards with a wheel, literally, between Aggett and Lord in 2nd and 3rd. Sherwood’s Lea Francis was last car home.
The excitement was far from over though. ‘With Lord in the hands of the ambulance people, the stewards took prompt action. They disqualified Aggett and ‘sent him out’ (banned him from competition) for six months’. ‘The Referee’s’ report of the race then pointed out the unfairness of this process which was so speedy, their was no call for full evidence and Aggett appealed. I’m uncertain of the response of officialdom to this request.
Aggett and Lord make contact, the accident attributed to the Bugatti T37 driver rather than Lord aboard the tipping Austin 7 Brooklands (Fairfax)
John Sherwood’s Lea Francis won the final of the open class ‘Widgery Cup’ Handicap, the ‘Clyde Battery Cup’ handicap for cars under 850cc final was won by CB Tye’s Austin 748cc and the All Powers Scratch Race final by CO Spurgeon’s Rajo Ford with the Club Handicap for under 2000cc cars won also by Tye’s Austin. In a day of interesting racing a special match race between Captain Hammond’s Gypsy Moth aircraft was won by the plane over J McCutcheon’s Morris Midget by a few lengths, the distance a flying mile, pun intended!
Penrith held the international spotlight for a week during the 2000 Sydney Olympic Games, the town is 50Km west of Sydney on the Nepean River, it was the site of the whitewater rafting and rowing competitions. But the hype about the Penrith 1930 World Championship race inclusive of its title were not indicative of the events true local nature.
The competitors were all from New South Wales, a notable absentee was Bill Thompson, three time winner of the Australian Grand Prix and in sparkling form in 1930. Earlier in the year he won his first AGP at Phillip Island and had swept the board in the same AGP winning Bugatti T37A during the Gerringong Beach racing carnival on NSW’s Illawarra Coast in May. Thompson was reported to be entered at Penrith but did not race, his entry was received ‘out of time’ and so was refused. Talk about a promoter putting due process in front of ‘the show’! ‘The Referee’ report noted the ‘the field was unworthy of a world championship. Without entries from Thompson, Drake-Richmond and Terdich, to mention but three of the missing cracks, the field was not even truly representative of Australia’. Both Harold Drake-Richmond and Terdich were Victorian stars, Arthur winner of the 1929 AGP at Phillip Island aboard a Bugatti Type 37A.
Charlie East, all smiles aboard the winning Bugatti T37, Penrith, October 1930 (Sydney Morning Herald)
Not that the quality of the final lacked talent in the context of Australian Motor racing, very much nascent at the time…
The Australian Grand Prix was held for the first time on an oval dirt layout around the showgrounds at Goulburn, New South Wales in 1927. The 1928 AGP, ‘The 100 Miles Road Race’ at Phillip Island, the first proper race in Australia on a road, run on a large, rectangular, gravel course was more indicative than Goulburn of the direction Australian racing would take and was indeed the race which started the tradition of road racing in Australia.
At the time Australian motor racing was largely amateur, a ‘run what you brung’ approach prevailed with most competing cars driven to and from the track. The sport evolved from hillclimbs, sprints and races on horse-tracks, the province of the gentry pre-War, to hillclimbs at Waterfall Gully, Kurrajong, Mount Coot-tha and Belgrave, beach racing at Gerringong and Sellicks to venues such as Aspendale, Maroubra and Penrith Speedways. Racing on Sydney’s banked, concrete Maroubra Speedway track was very professional. Maroubra was owned by a commercial enterprise, not a car club, there was prize money to be won, the approach of the top competitors was consistent with that- the importation of cars and preparation thereof with a view to commercial success prevailed.
Some brave kids watching a competing car at Kurrajong Hillclimb, 75Km northwest of Sydney in the lower slopes of the Blue Mountains, October 1920, the competitor has the two outside wheels in the dirt on turn in! Hillclimbs were incredibly popular forms of motorsport in Australia at the time either as stand alone events or as part of trials which were events mixing navigation and speed events, usually sprints and hillclimbs. Between 1915 and 1926 there were at least 50! different hillclimb venues used across the country (Michael Terry)
John Medley wrote that ‘it was some time before other groups followed (the Light Car Club of Victoria’s Phillip Island) road racing direction, preferring the simpler expedient of running trials with speed sections included (rather like modern rallies) or contests on simple dirt speedways- both of these being more easily controlled by the organisers and also less accessible to the long arm of the law. One consequence was that their was very much a casual air to the whole occasion, with ‘chop picnics, family gatherings and exuberant overnight parties.’
I have not used the term speedway racing as the ‘forked road’ the sport took in later years had not yet occurred, competitors contested a variety of events as above. In addition solo intercity record-breaking attempts were also important with Graham Howard recording that ‘…intercity records…were the most consistent form of competitive motoring in Australia until the late 1920’s, and produced our first household-name drivers…’
A little snippet in the ‘Nepean Times’ article is a reminder of the important co-existence, with the motorcycle dudes the leaders, of ‘bikes and cars racing at the same meetings. The article notes that the Penrith meeting was ‘the only all car one in New South Wales for about five years’. It is also reported in terms of contemporary competitor numbers (79) that the meeting had ‘a record entry for a car race meeting for any part of Australia’. Also amusing, the ‘Times notes, ‘Women are barred, (from entering the championship race) which means that Mrs J.A.S Jones will not be driving her supercharged Alfa Romeo (6C1750). But it is hoped this fine car will race even with a mere male at the wheel’!!
Stunning image by of WE Hart in his Bristol Boxkite biplane in 1912. A Parramatta dentist, Hart bought the Boxkite (frame number 10) from Joseph Hammond, demonstration pilot of the British & Colonial Aeroplane Co and became Australia’s first qualified pilot on 5 December 1911 (SLNSW)
Penrith Speedway ‘was formerly the first recognised airfield in Australia situated in Belmore Park and is now the village of Thornton’ wrote Peter Finlay, former racer and aviation writer.
‘William Ewart Hart was the first Australian to fly from there in 1911 in his Bristol Boxkite after demonstration flights by JJ Hammond in the Bristol. Hart established a flying school there before moving to Hart Common, now RAAF Richmond. Races between cars and aircraft were held at the speedway. Frank Kleinig Snr was a regular competitor and Sir Charles Kingsford Smith operated the ‘Southern Cross’ from the field at times. There is a spectacular memorial featuring a stylised Bristol Boxkite at the entrance to the oval’, Peter wrote.
The first car race meeting was held over the April 1924 Easter weekend- the track morphed through lap distances of 1 mile 80 yards to the 1 mile course used in 1930. The track was touted by international competitors who raced there as ‘The Worlds Greatest Dirt Track’ but its life was relatively short-lived. The Commonwealth Defence Department compulsorily acquired the land in 1941 and the circuit was consumed in that process.
RG Potts racing the Mrs JAS Jones owned Lea Francis on Gerringong’s Seven Mile Beach, 50 Mile Handicap on 10 May 1930. You can just see the pole at left which Potts is turning around to head back the other way on this beach near Kiama, 130 kilometres to Sydney’s south. There was no road racing in NSW at the time so racers did ‘the lot’- sprints, the hillclimbs which were often part of the trials conducted by local car clubs, the speedway at Penrith, and here upon Gerringong Beach. Sellicks Beach on Adelaide’s Fleurieu Peninsula was also used by ‘bikes and cars to race (Fairfax)
The six ‘World Championship’ entrants were all experienced New South Wales competitors with Sherwood and Sulman later entrants in Australian Grands’ Prix. Sherwood’s car appears to be a Lea Francis ‘Hyper’, a competition variant of the marque successful in the UK at the time and powered by a supercharged 1496cc 4 cylinder engine.
I can find no details of Sulman’s Salmson and am keen to hear from any of who may know about his car. Tom Sulman is revered in Australia as a doyen of racers who simply never stopped until the sport eventually took his life. I was at Winton a fortnight ago and looked again at the Sulman Singer, the amazing self-constructed dirt car Tom built and raced in England in the 1920’s before his return to Australia. It was a constant in Australian motor racing in both contemporary circuit events, and later from the mid-seventies, in historic racing when driven by Ron Reid. Upon his death not so long ago, his sons continue to race a car which must have done more racing miles than any other on the planet!.
Somewhat bizarre is that the ex-Charlie East Bugatti T37, chassis ‘37104’ sits in Earl Davey-Milne’s garage in Toorak, Melbourne one kilometre from where I am writing this article right now! Chassis ‘37104’ was the fourth T37 built and shipped to Sydney’s Russell Taylor, the prosperous owner of the Advanx Tyre company. It was raced for him by Charlie East, a driver whose stature was growing at the time.
East was a Maroubra regular, one of its stars having first raced there in 1926 and subsequently lapping at over 96mph and on one occasion his lap was timed at over 116mph. Davey-Milne bought the car in 1943, it remains in the Chev Corvette V8 engined, open chassis form Earl rebuilt it to in the late 1950’s. East didn’t race the car in an AGP but ‘37104’ was raced in the 1933/4/5 events at the ‘Island driven by Cec Warren in 1933 and John McCutcheon in ‘34/5.
It isn’t clear if either or both the East and Aggett Bugatti T37’s were normally aspirated or to T37A, supercharged specifications. I can find no references as to which particular Bugatti Aggett raced and am keen to hear from any Bugatistes who can help with the identity and specification of the car and the drivers background. Similarly, whilst Lord’s Austin 7 is reported to be of blown Brooklands specification I have no details of the Northam Austin 7. All details again gratefully received. These snippets of history are all interesting i think!
In this case the photo which inspired the research and the resultant article popped up on that internet thingy when I was messing around looking for shots of Bill Thompson after reader Rob Bartholomaeus corrected the caption of an article I’d written about Thompson and his Bug T37A. Its funny how one thing can lead to another!…
Intercity record breaking was a popular form of solo road competition in Australia until outlawed in 1935 due to accidents. Here is the 25.5hp Th.Schneider with Arthur Barnes at the wheel and mechanic Bill McCulloch alongside- they have just taken the Broken Hill, NSW to Adelaide, SA record covering the 533 kilometres of unmade roads in 8 hours 3 minutes. The car is parked out front of Booth’s Garage, 411 King William Street in Adelaide’s CBD. 12 August 1925 (WS Smith)
YouTube Footage of Penrith…
Makes clear the speed and danger of the place! I looked at the film enthralled but the danger was readily apparent before discovering other footage of a multiple fatality when a car crashed into spectators in 1938.
When ‘shit happens’ at speed, without protective barriers, its all over in the blink of an eye. Racing entry tickets still have the ‘Motor Racing is Dangerous’ message to this day, and so it was for all, spectators included until not so long ago!
Etcetera: WE Hart, Bristol Boxkite, Penrith circa 1912…
‘Nepean Times’ 27 September 1930, ‘Sydney Morning Herald’ 30 September and 7 October 1930, ‘The Referee’ Sydney 8 October 1930
‘Bathurst: Cradle of Australian Motor Racing’, John Medley, ‘History of The Australian Grand Prix’ Graham Howard and Ors, ‘Historic Racing Cars in Australia’ John Blanden, Peter Finlay
Photo Credits…
Fairfax, Sydney Morning Herald, State Library of South Australia, Sir Hudson Fysh, WS Smith, Michael Terry
Seeing this book by Bill Tuckey amongst the display collection Michael Gasking brought to the Repco Brabham Engines ex-employees get together brought a smile to my face…
I didn’t ever own it but it was one of a very small number of racing books in Camberwell Grammar School’s library when I started there, aged 12. Having only recently become interested in racing I was like a sponge for information. What was significant about this tome is that it was written by a talented journalist, Bill Tuckey, who edited both ‘Wheels’ and ‘Sports Car World’ magazines, the latter became one of my monthly bibles along with ‘Racing Car News’. The book covered a very broad canvas comprising all the Australian Grands Prix, portraits of the champion drivers at the time (the early sixties) as well as our circuits and the round Australia epic trials of the fifties.
It was a great read and provided important historical context for my contemporary obsessions at the time which were F5000 in Oz and F1 ‘over there’. I must suss it on Ebay.
Anyway, I thought I would share the cover art, the circuit depicted is Sandown, the Cooper T70 like car is just hooking into Shell Corner or Turn One, its vanilla name these days.
Bill Tuckey died not so long ago, this obituary in ‘Wheels’ is a great tribute to a talented man;
Repco workshop customer point of sale ‘take-away’ from 1962/3…
Given the sophistication of todays online marketing, driven as it is by complex algorithms using the reams of data we all hand over, unknowingly in our daily routines, it’s interesting to look at how it was once done, and still is to an extent I guess.
This quite eye-catching piece, with its complex die cut is sophisticated for its day and was no doubt scooped up in large numbers by the trade customers who frequented the various outlets of Repco’s burgeoning global empire. Repco’s retail outlets, well known to Aussies as a weekend DIY supply destination came later.
Former Repco engineer Michael Gasking has given me access to his extensive archive to share with you, this is the first of many more interesting Repco timepieces from Michael. Many thanks to him!
(Gasking)
It’s a few years before the Repco-Brabham ‘RB620’ V8 program but Ron and Jack’s cars were called and badged ‘Repco-Brabham’, the technical relationship was just extending to the maintenance and parts back up of the Coventry Climax FPF engine by whom Repco were licensed to make parts- pistons, rings and bearings amongst other components.
So the link between research and development, testing and racing is well travelled but neatly done I reckon, to see and hold this marketing timepiece is a joy so I thought it worth sharing.
(Repco/Gasking)
Brabham’s BT4 awaits a fresh Climax 2.7 engine during the 1963 Internationals in Australia.
The shot was taken at the Repco’s Doonside St ‘Repco Engine Laboratory’ in Richmond, an inner-Melbourne suburb.
Its a nice ‘reveal’ of Ron Tauranac’s spaceframe chassis of the day- the BT4 is the Intercontinental variant of the 1962 F1 Coventry Climax FWMV V8 engined BT3
Brabham chassis ‘F1-3-62’…
Inevitably my eyes were drawn to the cars chassis number. Its to the left and under the steering wheel on the dash, its with this stuff where my anal side kicks in- I wonder which car it is, thought i…
Allen Brown’s oldracingcars.com is one of my favourite bibles for such important minutae. No joy there, there was only one BT3 built, Jack’s first MRD built F1 weapon and that’s chassis ‘F1-1-62’. The subsequent 1962 built BT4’s all have ‘IC’, Intercontinental in Brabham lore, chassis prefixes so it’s a bit of a mystery that I am sure one of you can solve.
Roy Billington and Jack Brabham fettle the 2.7 litre ‘Indy’ Coventry Climax FPF of Brabham’s BT4 ‘IC-2-62’ prior to the start of the 1963 AGP at Warwick Farm. He won from Surtees Lola Mk4A Climax and McLaren’s Cooper T62 Climax, all three of them using CC’s of 2.7 litres in capacity (SMH/Tait)
It doesn’t follow that the cockpit shot at the articles outset is one of Jack’s cars of course.
He sold three BT4’s in Australia to Messrs Davison, McKay and Stillwell.
Lex’s ex-Brabham 1962 AGP winning car and Bib’s were based in Melbourne’s Armadale and Kew, both pretty close to Repco’s HQ in St Kilda Road so seem likely subjects for their Public Relations Department or Advertising Agency’s photographers. But neither of the chassis numbers work, mind you Bib’s BT4 was ‘IC-3-62’, I wonder if a bit of sixties ‘photoshop’ made it ‘F1-3-62’.
Anyway, that’s a theory until one of you can blow it out of the water!…
(Aussie Homestead)
Jack Brabham, in another new Brabham BT4 Climax, Warwick Farm, 10 February 1963, en-route to winning the Australian Grand Prix in ‘IC-2-62’
Etcetera…
(K Devine Collection)
These two photographs were taken upon the first BT4’s debut- ‘IC-1-62’ debut at Caversham, Western Australia over the November 1962 Australian GP weekend.
The very first in the long line of ‘Intercontinental’ Brabhams was shipped brand new from the UK to Australia, a great dice between Jack and Bruce McLaren’s also new Cooper T62 Climax was resolved after a misunderstanding of car placement between Arnold Glass and Jack damaged the new BT4 putting him out of the race.
(K Devine Collection)
After Brabham raced the car in New Zealand in early 1963 the car was sold to David McKay for use in our internationals that summer- Jack raced a new car ‘IC-2-62’- this machine was sold to Lex Davison at the end of the Sandown meeting in March when Jack returned to the UK.
Another shot of Jack with BT4 2.7 FPF in the 1963 Warwick Farm paddock- ‘IC-2-62’ (C Galloway)
(C Galloway)
Team Shell at the Warwick Farm AGP meeting- David McKay, Brabham BT4 Climax, Tony Maggs, Lola Mk4 Climax, Graham Hill, Ferguson P99 Climax, John Surtees, Lola Mk4A Climax, Jim Palmer and Chris Amon who both raced Cooper T53 Climax’.
(HRCCTas)
Brabham’s first BT4- the 1962 AGP car, ‘IC-1-62’ during a hillclimb event at Penguin, Tasmania in 1967.
John McCormack readies for the off, it was Mac’s performances in this car that encouraged him to ‘have a go’ at national competition, three Gold Stars and two NZ GPs were amongst his Formula 5000 successes to come in the seventies aboard Elfins and a McLaren M23 Repco-Leyland.
Credits…
Michael Gasking Collection, Nigel Tait Collection, Repco, Sydney Morning Herald, oldraingcars.com, Aussie Homestead, LAT, Colin Galloway, Ken Devine Collection, Historic Racing Car Club of Tasmania
Tailpiece: To the victor the 1963 AGP spoils, Stirling Moss, in the long process of recovering from his 1962 Lotus Goodwood accident was a hugely popular visitor to Australia that summer- and Jack…
Jack Brabham ponders wing settings on his Brabham BT26 Repco during the Canadian Grand Prix weekend at Mont Tremblant, 22 September 1968…
I blew my tiny mind when Nigel Tait sent me the photo, neither of us had any idea where it was. A bit of judicious googling identified the location as Mont Tremblant, Quebec, a summer and winter playground for Canadians 130km northwest of Montreal.
Regular readers will recall Nigel as the ex-Repco Brabham Engines Pty. Ltd. engineer who co-wrote the recent Matich SR4 Repco article (a car he owns) and has been helping with the series of articles on Repco’s racing history I started with Rodway Wolfe, another RBE ‘teamster’ a couple of years ago.
When Nigel left Repco in the ACL Ltd management buyout of which he was a part, he placed much of the RBE archive with his alma mater, RMIT University, Melbourne. Its in safe hands and available to those interested in research on this amazing part of Australian motor racing history. The archive includes Repco’s library of photographs. Like every big corporate Repco had a PR team to maximise exposure from their activities including their investment in F1. The Mont Tremblant shot is from that archive and unpublished it seems.
Its one of those ‘the more you look, the more you see’ shots; from the distant Laurentian Mountains to the pitlane activity and engineering of the back of the car which is in great sharpness. It’s the back of the BT26 where I want to focus.
The last RBE Engines article we did (Rodway, Nigel and I) was about the ’67 championship winning SOHC, 2 valve 330bhp 740 Series V8, this BT26 is powered by the 1968 DOHC, 4 valve 390bhp 860 Series V8. It was a very powerful engine, Jochen plonked it on the front row three times, on pole twice, as he did here in Canada in 1968. But it was also an ‘ornery, unreliable, under-developed beast. Ultimately successful in 4.2 litre Indy and 5 litre Sportscar spec, we will leave the 860 engine till later for an article dedicated to the subject.
Check out the DG300 Hewland 5 speed transaxle and part of the complex oil system beside it to feed the 860. Also the big, beefy driveshafts and equally butch rubber donuts to deal with suspension travel. It’s interesting as Tauranac used cv’s in earlier designs, perhaps he was troubled finding something man enough to take the more powerful Repco’s grunt, the setup chosen here is sub-optimal in an engineering sense.
The rear suspension is period typical; single top link, inverted lower wishbone, radius rods leading forward top and bottom and coil spring/damper units. It appears the shocks are Koni’s, Brabham were Armstrong users for years.
The uprights are magnesium which is where things get interesting. The cars wings that is, and the means by which they attach to the car…
See the beautifully fabricated ‘hat’ which sits on top of and is bolted to the uprights and the way in which the vertical load of the wing applies it’s force directly onto the suspension of the car. This primary strut support locates the wing at its leading edge, at the rear you can see the adjustable links which control the ‘angle on the dangle’ or the wings incidence of attack to the airflow.
I’ve Lotus’ flimsy wing supports in mind as I write this…
Tauranac’s secondary wing support elements comprises steel tube fabrications which pick up on the suspension inner top link mount and on the roll bar support which runs back into the chassis diaphragm atop the gearbox.
The shot above shows the location of the front wing and it’s mounts, this time the vertical force is applied to the chassis at the leading front wishbone mount, and the secondary support to the wishbones trailing mount. This photo is in the Watkins Glen paddock on the 6 October weekend, the same wing package as in use in Canada a fortnight before. The mechanic looking after Jack is Ron Dennis, his formative years spent learning his craft first with Cooper and then BRO. Rondel Racing followed and fame and fortune with McLaren via Project 4 Racing…
Jim Hall and Chaparral 2G Chev wing at Road America, Wisconsin 1968 (Upitis)
The great,innovative Jim Hall and his band of merry men from Midlands, Texas popularised the use of wings with their sensational Chaparral’s of the mid sixties. Traction and stability in these big Group 7 Sportscars was an issue not confronted in F1 until the 3 litre era when designers and drivers encountered a surfeit of power over grip they had not experienced since the 2.5 litre days of 1954-60.
During 1967 and 1968 F1 spoilers/wings progressively grew in size and height, the race by race or quarter of a season at a time analysis of same an interesting one for another time.
In some ways ‘who gives a rats’ about the first ‘winged Grand Prix win’ as Jim Hall pioneered ‘winning wings’ in 1966, the technology advance is a Group 7 not F1 credit; but Jacky Ickx’ Ferrari 312 win in the horrific, wet, 1968 French Grand Prix (in which Jo Schlesser died a fiery death in the air-cooled Honda RA302) is generally credited as the first, the Fazz fitted with a wing aft of the driver.
But you could equally mount the case, I certainly do, that the first winged GeePee win was Graham Hill’s Lotus 49B Ford victory at Monaco that May.
Chapman fitted the Lotus with front ‘canard’ wings and the rear of the car with a big, rising front to rear, engine cover-cum-spoiler. Forghieri’s Ferrari had a rear wing but no front. The Lotus, front wings and a big spoiler. Which car first won with a wing?; the Lotus at Monaco on 26 May not the Ferrari at Rouen on July 7. All correspondence will be entered into as to your alternative views!
Jacky Ickx’ winning Ferrari 312 being prepared in the Rouen paddock. The neat, spidery but strong wing supports clear in shot. Exhaust in the foreground is Chris Amon’s Fazz (Schlegelmilch)
Lotus ‘ruined thehi-winged party’ with its Lotus 49B Ford wing failures, a lap apart, of Graham Hill and then Jochen Rindt at Montjuic in the 1969 Spanish GP.Both drivers were lucky to walk away from cars which were totally fucked in accidents which could have killed the drivers, let alone a swag of innocent locals.
A fortnight later the CSI acted, banning high wings during the Monaco GP weekend but allowing aero aids on an ongoing basis albeit with stricter dimensional and locational limits.
Mario Andretti has just put his Lotus 49B on pole at Watkins Glen in October 1968, Colin Chapman is perhaps checking his watch to see why regular drivers Hill and Jackie Oliver are being bested by guest driver Andretti who was entered at Monza and Watkins Glen at seasons end! Andretti put down a couple of markers with Chapman then; speed and testing ability which Chapman would return to nearly a decade later. More to the point are the wing mounts; direct onto the rear upright like the Brabham but not braced forward or aft. Colin was putting more weight progressively on the back of the 49 to try and aid traction, note the oil reservoir sitting up high above the ‘box. Stewart won in a Matra MS10, Hill was 2nd with both Andretti and Oliver DNF (Upitis)
Chapman was the ultimate structural engineer but also notoriously ‘optimistic’ in his specification of some aspects of his Lotus componentry over the years, the list of shunt victims of this philosophy rather a long one.
Lotus wing mounts are a case in point.
Jack Oliver’s ginormous 125mph French GP, 49B accident at Rouen in 1968 was a probable wing mount failure, Ollie’s car smote various bits of the French countryside inclusive of a Chateau gate.
Moises Solana guested for Lotus in his home, Mexican GP on 3 November, Hill won the race whilst Solana’s 49B wing collapsed.
Graham Hill’s 49B wing mounts failed during the 2 February 1969 Australian Grand Prix at Lakeside, Queensland. Then of course came the Spanish GP ‘Lotus double-whammy’ 3 months after the Lakeside incident on 4 May 1969.
Faaaarck that was lucky one suspects the Lotus mechanics are thinkin’!? The rear suspension and gearbox are 200 metres or so back up the road to the right not far from the chateau gate Ollie hit. It was the first of several ‘big ones’ in his career (Schlegelmilch)
For the ‘smartest tool in the shed’ Chapman was slow to realise ’twas a good idea to finish races, let alone ensure the survival of his pilots and the punters.
I’m not saying Lotus were the only marque to have aero appendages fall off as designers and engineers grappled with the new forces unleashed, but they seemed to suffer more than most. Ron Tauranac’s robustly engineered Brabhams were race winning conveyances generally devoid of bits and pieces flying off them given maintenance passably close to that recommended by ‘Motor Racing Developments’, manufacturers of Ron and Jack’s cars.
The Brabham mounts shown earlier are rather nice examples of wings designed to stay attached to the car rather than have Jack aviating before he was ready to jump into his Piper Cherokee at a race meetings end…
Hill P, ‘Stardust GP’ Las Vegas, Chaparral 2E Chev 1966
Now you see it, now you don’t; being a pioneer and innovator was the essence of the Chaparral brand, but not without its challenges! Phil Hill with 2E wing worries at Las Vegas in 1966, he still finished 7th. Jim Hall was on pole but also had wing problems, John Surtees’ wingless Lola T70 Mk2 Chev won the race and the first CanAm Championship (The Enthusiast Network)
The 13 November 1966 ‘Stardust GP’ at Las Vegas was won by John Surtees Lola T70 Mk2 Chev, CanAm champion in 1966. Proving the nascent aerodynamic advances were not problem free both Jim Hall, who started from pole and Phil Hill pictured here had wing trouble during the race.
The Chaparral 2E was a development of the ’65 2C Can Am car (the 2D Coupe was the ’66 World Sportscar Championship contender) with mid-mounted radiators and huge rear wing which operated directly onto the rear suspension uprights. A pedal in the cockpit allowed drivers Hall and Hill to actuate the wing before corners and ‘feather it’ on the straights getting the benefits in the bendy bits without too much drag on the straight bits. A General Motors ‘auto’ transaxle which used a torque converter rather than a manual ‘box meant the drivers footbox wasn’t too crowded and added to the innovative cocktail the 2E represented in 1966.
Its fair to say the advantages of wings were far from clear at the outset even in Group 7/CanAm; McLaren won the 1967 and 1968 series with wingless M6A Chev and M8A Chev respectively, winning the ’69 CanAm with the hi-winged M8B Chev in 1969. Chaparral famously embody everything which was great about the CanAm but never won the series despite building some stunning, radical, epochal cars.
Phil Hill relaxed in his 2E at Laguna Seca on 16 October 1966, Chaps wing in the foreground, Laguna’s swoops in the background. Phil won from Jim Hall in the other 2E (TEN)
Hill G, Monaco GP, Lotus 49B Ford 1968
Interesting shot of Hill shows just how pronounced the rear bodywork of the Lotus 49B was. You can just see the front wing, Monaco ’68 (unattributed)
Hill taking a great win at Monaco in 1968. Graham’s was a tour de force of leadership, strength of mind and will. Jim Clark died at Hockenheim on 7 April, Monaco was on 26 May, Colin Chapman was devastated by the loss of Clark, a close friend and confidant apart from the Scots extraordinary capabilities as a driver.
Hill won convincingly popping the winged Lotus on pole and leading all but the races first 3 laps harnessing the additional grip and stability afforded by the cars nascent, rudimentary aerodynamic appendages. Graham also won the Spanish Grand Prix on 12 May, these two wins in the face of great adversity set up the plucky Brits 1968 World Championship win. Remember that McLaren and Matra had DFV’s that season too, Lotus did not have the same margin of superiority in ’68 that they had in ’67, lack of ’67 reliability duly noted.
Hills 49B from the front showing the ‘canard’ wings and beautifully integrated rear engine cover/spoiler (Cahier)
Ickx, Rouen, French GP, Ferrari 312 1968
Mauro Forghieri, Ferrari’s Chief Engineer developed wings which were mounted above the engine amidships of the Ferrari 312. Ickx put them to good use qualifying 3rd and leading the wet race, the Belgian gambled on wets, others plumped for intermediates.
Ickx’ wet weather driving skills, the Firestone tyres, wing and chaos caused by the firefighting efforts to try to save Schlesser did the rest. It was Ickx’ first GP win.
It looks like Rainer Schlegelmilch is taking the shot of Jacky Ickx at Rouen in 1968, note the lack of front wings or trim tabs on the Ferrari 312 (Schlegelmilch)
Tailpiece: The ‘treacle beak’ noting the weight of Tauranac’s BT26 Repco is none other than ‘Chopper’ Tyrrell. Also tending the car at the Watkins Glen weighbridge is Ron Dennis,I wonder if Ken’s Matra MS10 Ford was lighter than the BT26? If that 860 engine had been reliable Jochen Rindt would have given Jackie Stewart and Graham Hill a serious run for their money in 1968, sadly the beautiful donk was not the paragon of reliability it’s 620 and 740 Series 1966/7 engines generally were…
James Hunt dives for the inside line in his March 713S Ford, AJ and his Brabham BT28 Ford has left a gap way bigger than he ever did when they slugged it out in GP racing…
It’s 1971, the BRSCC MCD Shell Super Oil British F3 Championship at Brands Hatch on 1 March 1971 and both drivers are trying hard to jump up to the next level, the road for Hunt would be easier than Jones, James a coming star with the Hesketh March 731 in 1973 and Jones an F1 ‘occasional’ from 1974.
The ‘facts’ are from the photo caption, the cars and drivers are correct but the date/Brands event don’t accord with the ‘F2 Register’ record of that event, my F3 race resource. It appears AJ didn’t race with #69, a number with obvious appeal to him at all during ’71.
One for the British F3 historians amongst you!
(DLuff-MBisset-Copilot)
The 1969 spec Brabham BT28 Ford breaks cover near MRD’s Weylock factory on a date unknown, complete with wing kit, which was fitted, or not! depending upon the circuit and driver preference.
As Brabham, Tauranac and Denny Hulme scanned the competitive landscape as 1966 unfolded, they formed the view that a similar formula to ’66 stood a good chance of success in 1967. A small, light, responsive chassis, this time designed around the engine. Remember that Jack’s successful ’66 mount, BT19, was an adapted, unraced 1965 GP car Tauranac designed around the stillborn Coventry Climax Flat-16. Ron’s ’67 BT24 was and is a superb car; its race record we shall review in an article about Brabham Racing Organisation’s (BRO) successful ’67 season.
In terms of the engine, keeping it simple and light had paid big dividends for Repco Brabham Engines Pty. Ltd. (RBE) in the first year of the 3 litre formula.
The fortunes of Ferrari, BRM, its H-16 engine, the antithesis of the Brabham Repco’s in terms of weight and complexity and the Maserati V12 were well covered in my article on the ’66 season. Dan Gurney’s Weslake V12 engine showed promise, but reliability continued to be an issue. The Ford Cosworth DFV didn’t race until the Dutch GP in June 1967. Brabham’s needed more power of course; too much power is rarely an issue, but they figured they needed less power than most others on the grid. If Jack and Denny started the season with a reliable, just quick enough package, BRO could retain their title as others sought to make what were ultimately potentially quicker, more sophisticated multi-cylinder, multi-cam cars reliable. Click here for my article on Jack’s successful 1966 season: https://primotipo.com/2014/11/13/winning-the-1966-world-f1-championships-rodways-repco-recollections-episode-3/
The beautifully fast, light, forgiving championship winning Brabham BT24 Repco 740 ahead of Chris Amon’s Ferrari 312 at Le Mans during the ’67 French GP. Denny 2nd to Jacks winning sister car, Amon DNF with throttle linkage failure (Automobile Year)
They were an intensely pragmatic group of racers in this Brabham/Repco senior mix…
Repco’s Charlie Dean, Phil Irving, Norman Wilson (designer of the ’67 RBE740 Series V8), Brabham and Tauranac all built winning cars (and bikes in Phil’s case) themselves, as in, built with their own hands. Dean created the extraordinary series of Maybach Grand Prix cars. Look at my Stan Jones article for much detail about this series of racers built by Charlie and initially raced by him, and then later by Stanley with much success. Norman Wilson built a Holden-engined special in his youth, covered in brief at the end of this article. Tauranac and his brother Austin built and raced the ‘original’ Ralts before Ron joined Jack in the UK in 1961.
Dean, Wilson, Tauranac and Brabham had been/were drivers. They knew what it took to win races. They understood winning was as much about torque as power. Handling was essential, the circuits then were all far from just requiring top-end power, what was needed at Monza was different to the blend of corners and contours at Brands. All had driven cars and lost races due to unreliability. They understood a balanced package was critical, that whatever power they had needed to be put to the road. The point I make is that these guys were practitioners, not theorists, on ‘an engineering jolly’.
The RB group were about the application of sound pragmatic engineering practice; they didn’t have to think deeply about this stuff it was part of their DNA given the ‘build and develop it yourself’ school from which they came. These guys weren’t ‘university engineers’ (which is not to say they lacked formal qualifications) but very practical chaps. Let the others chase ‘engineering perfection’ as they saw it; ‘an evolution of what we have is probably enough to do the trick’ was the correct thinking.
It was a whole different ballgame they confronted at the same time in ’68, but this was mid-’66, the game-changing DFV was still a distance away…
Repco studio shot of the front of the amazingly compact ’67 championship-winning ‘RBE740’, SOHC, 2 valve ‘between the Vee exhaust’, circa 330bhp V8. The ‘mix and match’ of engine parts described in the text is proven by the use of a 620 water pump, a 630 chain timing cover, an oil filter American ‘Purolator’, note the oil pump below the dry sump pan, and up top, the ends of aluminium water cooling rails, a Bosch distributor and Lucas fuel injection trumpets (Tait/Repco)
1967 Engine Design Deliberations…
Ex RBE Engineer Nigel Tait; ‘By July 1966, the World Titles had already been ‘wrapped up’ for the year, so the team were already thinking about the engine for 1967. Phil, Jack and Ron were all keen on the idea of getting the exhausts out of the airstream to clean up the car in terms of better aerodynamics and also for ease of plumbing the exhausts, which otherwise had to negotiate the tubular chassis frame. The 1966 BT19 championship-winning chassis did not present a very effective frontal profile, its exhausts well out in the breeze.
Colin Chapman was far from the first chassis man to be prescriptive about design elements of an engine, as he was to Keith Duckworth in relation to the Ford Cosworth DFV, particularly in relation to its integration with ‘his’ chassis.
Between the Vee exhausts had been raced successfully by BRM with its P56 1.5-2 litre family of V8’s in recent years. Ferrari also chose the same approach with its ’67 3 valve V12, its fair to say it was an F1 design trend of the time. In some ways, Ferrari’s approach was better than Brabham’s as Ron maintained outboard springs and shocks on both the front and back of his ’67 BT24 chassis. Ferrari, as they did in 1966, used a top rocker and an inboard front spring/shock, presenting less resistance to the air at the front of the car at least. Ferrari went outboard at the back like Brabham. (and the rest of the grid)
Old and new; ’66 RB620 305 bhp V8 left and ’67 RB740 330 bhp V8 right, F1 champions both. 740 was 3 inches shorter, 4 inches wider across the heads and 15 lbs lighter than 620. Dimensions otherwise the same; 25.5 inches long, 17.25 inches wide across the bellhousing (Repco)
Conceptual Design of the Heads…
RBE Chief Engineer Norman Wilson: ‘ It would have been Jack’s idea to put the exhausts in the centre (of the Vee). Jack asked if it could be done. I remember when I started designing them, I spent a lot of time, probably 3 or 4 days, just drawing one cylinder up to try and prove that you could fit everything in. Since you have got a whole row of head studs, you have got to have water passages between the ports. The whole idea was to prove that you could get the inlet port in, the exhaust port and all the head studs. That was a giant task to figure out in a way.
‘It meant putting the outer row of studs underneath the exhaust ports. I don’t think I have the layout now, but I remember spending a huge amount of time, and finally I went to Frank Hallam (RBE General Manager) and said I think we can do it. And that’s how the 40 Series heads started. ‘To manage to get everything on one side, and the thing is, unlike most engines we built, we wanted big ports. So to fit all these big ports in, plus the port wall, plus the bolt bosses, was a major task. I think it took about three days’ work for me to fit everything in a rough layout.
Jack’s BT24 Repco 740 being fettled during ’67, circuit unknown. ‘Box is 5 speed Hewland DG300 transaxle, note rubber ‘doughnuts’, Lucas injection ‘bomb’ or fuel pump to the right of the box, also rear spaceframe chassis diaphragm. Getting the exhausts outta the airstream shown to good effect in this shot (unattributed)
The ’40 Series’ Between the Vee 1967 Cylinder Heads Design Detail…
‘…the new cylinder heads retained parallel valves, but they were now in line with the cylinder axis (instead of at 10 degrees to the axis as on the ’66 20 Series heads and were flush to the head face,’ said Wilson. ‘The 40 Series heads used the Heron head design. In this design, the cylinder head is flat, and the piston has the combustion chamber at the top of the piston (a bowl in the piston arrangement). The other feature of the 40 Series head is that it has a tall inlet port. It had a fairly long, relatively straight section there on Jack Brabham’s suggestion. He had received some highly secret information from Honda that this was the way to go. In hindsight, I don’t think so. All these things are better in hindsight, but that’s how we did it’
‘The Heron head, I think everyone agreed, had to be the way to go because the Cosworth SCA (F2 engine) was 1000cc and was putting out 120bhp. At the time in F2, it was winning everything. I think it puts out 123bhp. Now, if you are looking at a 3-litre engine, that’s 369bhp. And at that time, that would have been looking for us a fairly exciting sort of figure. The other point about the Heron head is that it allowed us to have a single camshaft, which we wanted to have the low weight, simplicity and ease of manufacture.
‘The 40 Series head was purely made for the car. No other reason. It put the exhausts down the centre of the Vee… that’s what Ron wanted, he made the car, so why not get what he wanted.
‘The highest output of the 740 Series 3-litre was only a bit over 330bhp. This horsepower rivalry between the different engine manufacturers at the time, the horsepower numbers were really irrelevant. At the time, Maserati claimed about 500bhp, but they were adding on about 100bhp to make up for the exhaust gas pollution in the test cell. But really, it’s about the area of the horsepower curve. ‘If they had 500bhp, they would be leaving us behind a lot quicker than they are leaving us behind!’ was a quip Rod Wolfe recalls Jack making to the boys in the RBE engine assembly area on one of his trips to Australia in 1967.
‘One of the philosophies was for the engine to always have a wide power range and good power at the bottom end of it, which suited the light car. So if ours was 330bhp, there was no way other cars had 400-500bhp claimed. Our power was distributed much more evenly across a wider range of revs. Thus, Denny Hulme would say it was great to drive a Repco Brabham because he could overtake competitors in the corners as if they were ‘tied to a fence’.
There were some problems with 40 Series head porosity during ’67, as ex-RBE machinist/storeman Rodway Wolfe recalls: ‘Norm did a fantastic job to even succeed with the casting, and it proved to be a great engine in larger capacity too, bigger valves etc…we were able to fit very large valves without too many seat problems. The 40 series did have a lot of porosity problems with the ports, some we scrapped as the ports actually broke through when we were porting them, and there was not the welding equipment available that we have nowadays to repair them. Porosity, a big drama, as I say, one of my jobs was to send the castings to ‘Nilsens Sintered Products’ in Richmond, where they placed the heads in a vacuum and impregnated them with hot resin. Vacuum impregnation solved some of these problems.
Brabham on the Warwick Farm grid, WF Tasman round in 1967. In relation to the cooling duct feeding the engine, Rodway Wolfe comments, ‘There were a few heat problems in the valley of the engine with the 40 series as the fuel metering unit was also located in the valley, but small heat shields seemed to correct this problem, and it was not an issue once the car was on the track, of course. ‘ It seems these ducts were used in the ’67 Tasman rounds on the 640 engines used by Jack and Denny and subsequently sporadically on the 740 engines, Le Mans for example (Bruce Wells)
A typically pragmatic decision to the heads was made in relation to the 1967 Repco block…
Remember that the ’66 engine used a heavily adapted version of the Oldsmobile F85 aluminium block. Repco still had a swag of unused blocks sitting in Rod Wolfe’s Repco store at Maidstone. The blocks had been successful, a world title proof enough of their effectiveness, but the machining and adaptation required to make them an effective race tool meant they were expensive but still sub-optimal. But it wasn’t all plain sailing with the block, however much it may have seemed so from the outside, Tait; ‘For much of 1966 we had serious blowby issues due to distortion of the dry sleeves, and it was not until almost the end of that year that we went to wet sleeves. The F85 Olds blocks came with dry sleeves in situ’.
Repco’s race engine commercial ends were to be served by building and selling engines for Tasman use and for Group Seven sportscars, burgeoning at the time globally; 2.5 litres was the Tasman Formula capacity limit, and the F85 ‘maxed out’ at 4.4 litres, which was the capacity used for the sportscar engines. Repco’s first sale of a customer engine was the 4.4-litre 620 Series unit sold to Bob Jane for his Elfin 400.
So Repco decided to ‘have their cake and eat it too’. The new bespoke ‘700 Series’ block would allow all of the F85 ‘600 Series’ bits and bobs to attach to it: heads, timing case, sump, the lot. So Repco could gradually use its stock of F85 blocks for Tasman and sportscar use whilst ‘700 Series’ blocks were used in F1 for 1967 and more broadly in capacities up to 5 litres subsequently. As engines were rebuilt, the 600 blocks were replaced progressively by 700 series units. 600 blocks ceased to be used when there were none left. Typically practical, sensible and parsimonious, Repco!
Whilst the ‘700 Series’ block design decision, to allow 600 hardware to be attached, was a ‘functional’ pragmatic decision, the aluminium block itself was also improved, being redesigned to increase rigidity. The new block design was commenced by Irving, he and others say, before he departed from RBE, but the completed block is his replacement as Chief Design Engineer, Norman Wilson’s design.
The post Phil Irving RBE design team; L>R GM Frank Hallam and Engineers Norman Wilson, Lindsay Hooper, John Judd and Brian Heard (Repco)
Phil Irving’s departure by resignation or sacking by RBE GM Frank Hallam is an important part of the RBE story and will be dealt with in a separate article. I explore not just the difficult relationship between these two characters but also the broader issues of the leadership of Repco, CEO Charles McGrath’s key enduring support of the RBE program and the appointment of Bob Brown as the Director responsible for RBE instead of alternatives, including Charlie Dean at the project’s outset. The antipathy between Hallam and Irving was partially about personality but also about politics and legacy in terms of who is responsible for what of the RB620 design and build. More on this topic very soon.
For now, let’s just focus on the RB740 engine, which in no way, shape, nor form was negatively impacted by Irving’s departure…whilst noting that there probably would have been no 740 had it not been for the success of Jack and Phil’s RB620, JB as the engine’s conceptual designer and PI as its detail designer and draftsman…
Machining the RB700 block, note the stiffening ribs referred to in the text (Wolfe/Repco)
Norman Wilson: ‘When I went there (to RBE from Repco Research), John Judd (who had been seconded to Repco by BRO in the UK) had done a new crankcase. So I asked to look at it, and John showed it to me, and I said we can’t make it. It was impossible because it was the basis of a whole new engine. It became a mutual decision (by the design team) that we make a crankcase that went underneath, on top of and behind exactly what we had. ‘We couldn’t have made a crankcase, head and timing case all at once. So we made a crankcase, and then we did the 40 series heads. We had to have a timing case with the heads, but it meant we didn’t have too much to do at once, and we just kept progressing.
Wilson: The new crankcase was designed from scratch but was also designed so it could accommodate the 20 series cylinder head if we wanted to. It was critical, being a fairly small outfit, that we had the maximum amount of interchangeable flexibility between all the components that we made. So the 700 series crankcase was designed to overcome the problems that we had seen or experienced with the Oldsmobile F85 600 series crankcase. It had wet liners, which in part was because it was easier to cast the cylinder block with a wet liner design in that it simplified dramatically the coring required for the casting of the block.
‘The Oldsmobile engine showed it had main bearing problems, so we altered the main bearing arrangement to be much more rigid. We extended the studs up through into the centre of the Vee with nuts on top to take some of the load up through to the top of the block. The unfortunate part of that was that the design was right, but people would always do the nuts in the top up tight. And of course, what would happen was that the cylinder block, being aluminium, would expand more than the stud and would eventually break it. What they should have done, and no one would listen, was to do them up at a much lower torque so when the engine got hot it would put the right load on the stud’.
RBE Boys, Maidstone, undated but circa 1966/7. Back L>R Kevin Davies, Eric Gaynor, Tony Chamberlain, Fred Rudd, John Mepstead, Peter Holinger. Middle; Vic Mosby, Howard Ring, Norman Bence. Front; David Nash, Rodway Wolfe, Don Butler (Tait/Repco)
‘The front bearing panel of the block was made stronger because this had proved to be a weakness with the Oldsmobile block. The back of the block was made with the same stud pattern as the Olds block so that all the existing gearbox adaptors could be used. The block was made with the idea of making it as light as possible, and that was one of the critical things in the design. In the end, Frank suggested we put some diagonal ribbing on the 700 series crankcase walls to strengthen them. ‘The sidewalls of the crankcase were actually bolted to the main bearing caps… cross-bolting (and strengthened the crankcase considerably). So I felt the diagonal ribbing was really quite irrelevant. …Frank wanted it and, you know, he was a pretty good boss to work for, so that’s what we did’.
‘The other thing about the block was that later, when we made the 4.2-litre Indianapolis engines (760 Series DOHC, 4-valve V8 in 1968/9) we could alter the sealing arrangements; in fact, the later F1 engines (’68 860 Series) were the same, so we used Cooper rings instead of head gaskets. Cooper rings sealed the combustion chamber, and O rings sealed the water passages. But we also then had a groove around the outside of the Cooper ring joined with a shallow slot to the edge of the head, so if one Cooper ring leaked slightly, there was no way it would pressurise the cooling system.
RBE700 Series block, note the cross bolted 5 main bearings (Repco)
‘With the Indianapolis engine (760 Series 4.2), those grooves came out of the inside of the Vee. So you could run your engine in the pits, and you could put your finger over the end of each groove, and you’d know if any of the Cooper rings were leaking slightly. The 700 block was the same height as the Olds F85 block. And the 800 block (860 F1 and 830 Tasman 2.5) was a (1.5 inches) lower one to make the engine smaller.’
The 700 Series block, apart from being stronger, was also 15 Kg lighter than the F85 ‘600 Series, Norman Wilson again; ‘The F85 block was designed to be diecast on a diecasting machine; it was perhaps a bit thicker in spots just to make it easier to cast. We got rid of a considerable amount of aluminium around each cylinder…The Repco block didn’t have all the bosses down the centre along the block for the cam-followers. It didn’t have the cam bearings for the centre camshaft (of the F85). We didn’t have the stiffener plate on the bottom. The bearing caps were bigger, but they were done a bit better, and they were probably no heavier than what was there. And in all the places where strength was not required, we just skinned them down as much as we could’.
(Wolfe/Repco)
Most of the components for the engine were made by Repco subsidiary, Russell Engineering, few were contracted out.
Wolfe: ‘Most of the RBE engine components were made at the Maidstone factory. The pistons and rings, however, were from other Repco companies, and the crankshafts were from Laystall in the UK, but no other F1 engine constructor made their own pistons and rings in 1966; even Ferrari used Hepolite pistons, so Repco were unique.
Harold Clisby’s engineering business in South Australia cast many of the heads. Kevin Drage, the senior engineer at Castalloy, the Clisby subsidiary that made the heads, recalled that around 120 cylinder heads of four types-30, 40, 50 and 60 Series were cast by the company over the period of the RBE program.
The 30 Series head was detailed by John Judd and was two-valve with inlet and exhaust ports on either side of the head, ‘crossflow’ inlets between the Vee and exhausts out the side. 40 Series (the ’67 championship winner) heads were detailed by Norman Wilson, which had inlet and exhaust ports on the same side of the head, between the Vee exhausts.
Drage recalls that the two-valve 30 and 40 Series heads were soon followed by the four-valve 50 and 60 Series designs. John Judd drew these up with the 50 Series design having diagonally tangentially ported inlet and exhaust valves resulting in 16 inlet trumpets and 16 exhaust pipes, the 60 Series design having siamesed inlet and exhaust ports.’ The 50 Series heads, which were built and dyno tested, and the 60 Series 1968 F1 4 valve, DOHC design are the subject of a future article. The fact that RBE persevered so long, at GM Frank Hallam’s insistence, with the 50 Series heads delayed development of the 60 Series design, to RBE and BRO’s cost during the ’68 F1 season.
The Commonwealth Aircraft Corporation at Fisherman’s Bend, not too far from RBE’s Maidstone factory, made the alloy crankcases and timing covers; note that Wilson went to double-row timing chains with RB740 compared with the single chain of RB620.
Ex-Repco engineer George Wade is often given credit for the camshafts, but Rod Wolfe says, ‘We made the camshafts for all of the engines, George Wade profiled them to various specs, but we turned the billets with a mimic tracer on our Tovalieri lathe. The very first 620 cams were cast iron but were changed to steel in 1966’.
Lucas fuel injection was of course again used, as well as a Bosch distributor.
Summary of RBE740 F1 3 litre engine specifications/suppliers…
Bore/Stroke; 3.5X2.55 inches, capacity 2996cc. Power 330bhp@ circa 8400rpm, weight 350 pounds
Pistons, rings and main bearings by Repco, big end bearings supplied by Vandervell
Lucas fuel injection, Bosch coil and distributor, Champion plugs, Esso fuel and oil and Borg and Beck clutch
Denny Hulme DNF ignition and Jackie Stewart 2nd in their ‘between the Vee’ exhaust Brabham BT22 ‘640 Series’ Repco and BRM P261 respectively Levin, NZ 14 January 1967 (Digby Paape)
Racing the 640: 1967 Tasman Series…
The first race of the 1967 GP season was the South African GP at Kyalami on January 2. Jack and Denny raced 620 Series V8’s; the 740 was running late due to delays in patterns being made for the 700 crankcase. It’s an interesting observation given that Hallam told Brabham by letter dated 23 September that the 700 patterns were half finished. In any event, the engine was late so it made its debut in the Tasman Series, or more specifically, 640 Series engines did; the new heads atop the 600 Series/F85 Olds blocks.
Brabham giving his 620 engined BT20 some welly at Kyalami during the South African GP at Kyalami on 2 January 1967, he was 6th from pole with Denny 4th from grid 2. Pedro Rodriguez won in a Cooper T81 Maserati (unattributed)
RBE staff numbers during the Christmas/New Year 1966/7 period swelled to 37, with 23 engines being assembled during this period. Frank Hallam records that due to the great amount of dismantling, assembly and experimentation that took place, only four 2.5-litre motors raced in the Tasman Series. The 640 series 2.5 litre Tasman engines gave circa 265bhp@8500rpm.
Brabham’s full ’67 F1 season i will cover in a separate article, here we look at the Tasman races for the 640 and early season F1 races of the 620 and 740.
RBE’s Michael Gasking and BRO’s Roy Billington and another mechanic prepare Brabham’s ‘RB640’ 2.5 V8 engined BT23A before the Sandown Tasman round on 26 February 1967, DNF ignition. Repco Maidstone factory (Wolfe)
If you take the view that the ’67 Tasman was a warm-up for the ’67 World Championship, then it was a success for Brabham and RBE. The 40 Series heads were thoroughly race-tested during the annual Australasian summer contest.
Equally important was Jack’s mount, his car designated BT23A was an adaptation of Ron Tauranac’s very successful new 1967/8 BT23 F2 design, which won dozens of races in Ford Cosworth FVA 1.6 litre F2 spec. The Tasman BT23A was effectively the prototype of the BT24, which went on to win the ’67 titles, so the Tasman ‘blooded’ both the chassis and engine well before the F1 season. The reliability which flowed from this development process won RBE and BRO the ’67 championships, the Lotus 49 Ford Cosworth DFV was well quicker but had not had the development miles the Brabham Repco’s had…
Jim Clark took the 1967 Tasman title in an F1 Lotus 33 fitted with a stretched to 2-litre Coventry Climax FWMV V8 engine, a quick, reliable, well-proven combination. Clark took 3 wins, and Jackie Stewart 2 in a similar F1 BRM P261. But the stretched to about 2.1 litres P56 V8 stressed the BRM transmission to its limits, the ‘tranny its weakness that summer. Jack was equal 3rd on the points table to JYS with 1 win.
Jim Clark Lotus 33 Climax, Levin International winner, 14 January 1967 (Digby Paape)
Jack and Denny contested all rounds of the championship with the exception of Teretonga, the last Kiwi event. Jack took a win at Longford and Denny 3rd at Wigram, his best. Brabham had a lot of unreliability, but the problems weren’t in the main engines; for Denny, a radiator hose at WF, gear selector at Sandown and electrical problems at Longford and for Jack, a driveshaft breakage at Teretonga and ignition dramas at Sandown.
At that stage, Repco hadn’t sold customer Tasman 2.5 engines of any type; the engines were made available later in the year in time for the commencement of the domestic Gold Star series (640 & 740 Series 2.5 V8s). In the meantime, the more important business of getting the 3-litre ‘740 Series’ V8S into Tauranac’s exquisite little BT24 was the priority.
Jack from Denny in BT20’s; Jack’s 740 engined and Denny’s 620, Denny won both heats and Jack the final giving the 740 the first of its many wins in 1967. Oulton Park ‘Spring Cup’, 15 April 1967 (Brian Watson)
The first F1 event of the European ’67 season was the Race of Champions at Brands Hatch on 12 March. Dan Gurney won both heats and the final in his Eagle T1G Weslake. Jack was 9th in a ’66 spec 620-engined BT20 with Denny DNF, similarly equipped.
The ‘Daily Express Spring Cup’ at Oulton Park followed on 15 April, Brabham ‘cleaned up’ in BT20s; Denny won both heats and Jack the final, taking a great race win for the new 740 3-litre V8 with Denny 2nd in a 620-engined ’66 chassis.
Jack proved the speed of the new RB740 V8 at Monaco, its championship race debut, plonking it on pole but it went bang with a broken conrod in the races 1st lap, car is Jack’s beloved ‘old nail’ Brabham BT19, his ’66 championship winning chassis. Denny won in ‘last years’ quick and reliable BT20 Repco ‘620’ (unattributed)
BRO fitted its first 740 Series engine just in time for the Monaco GP on May 7. Apart from the delays caused by late patterns for the blocks, Repco Die and Tool Co forged conrods developed faults. After being unable to establish why the Repco rods were failing, the team went the Carillo route, the team using these tried and true products…despite not being made in Oz! Rod Wolfe: ‘We did discover that the chamfer at the bolt heads did not match the bolt radius under the head of the bolt, and even when tensioned correctly, they were not seating properly, resulting in a couple of failures. ‘
The definitive RB ‘740 Series’ engined Brabham BT24 didn’t appear until Jack gave the chassis/engine combination its championship debut at the Belgian GP at Spa on June 18. This was 2 weeks after the Ford Cosworth DFV V8 took the first of 155 GP wins, the 1967 successful Brabham GP season, a Repco story for next time…
‘Black Jack’ at La Source during the ’67 Belgian GP. Both he and Denny retired with engine problems in BT24 and BT19 respectively. Dan Gurney took a famous and well deserved win in his Eagle T1G Weslake V12, 18 June. Compact nature of the F2 derived BT24 clear (unattributed)
Repco 1966/7 promotional film…
Check out this great footage, the first half covers Brabham’s victorious 1966 F1 season, the other bit the ’67 Tasman season, the debut of the 640 Series V8’s, including some factory footage of the engines build.
Etcetera…
Rodway Wolfe ‘The dyno test house at the rear of the Repco Maidstone factory. The silver drum on the side was the fuel tank, which was changed when needed. The walls of the building were very thick…when the engines were running at full noise, you could hold your hand against the wall and get a massage! Fascinating!’ (Wolfe)Roy Billington and Denny Hulme in the middle of a ratio change in the Wigram paddock. Note the Brabham BT22 Hewland gearbox, high-pressure Lucas ‘bomb’ fuel pump and 640 engine of course (J Manhire)Repco 640 2.5 V8 power; Jack all cocked up in Warwick Farm’s Esses during the AGP, Warwick Farm, 19 February 1967. Brabham was 4th in his BT23A, Stewart won from Clark and Frank Gardner in BRM P261, Lotus 33 Climax and Brabham BT16 Climax respectively (unattributed)Repco works Brabham Repcos’ on the move, Tasman Series, Longford, Tasmania 1967. ‘Rice Trailers’ the ducks guts at the time, tow cars are Holden ‘HR’ Panel Vans, 3-litre straight OHV 6-cylinder engines and ‘3 on the tree’ column shift manual ‘boxes (Ellis French)Sandown Tasman, 26 February 1967, Brabham, Brabham BT23A Repco, Stewart BRM P261 and Hulme on the outside, Brabham BT22 Repco, all DNF! Jack with ignition, Stewart crown wheel and Hulme gear selection problems. Clark won in a Lotus 33 Climax. You can see the ducts directing cooling air between the Vee shown in an earlier shot (unattributed)Jack hooks into the Viaduct ahead of Jim and Denny in David Chintock’s impression of the ’67 Longford Tasman round which Brabham’s BT23A won (Wolfe/Racing Car News)
Etcetera: Norman Wilson RBE740 Chief Designer…
Norman Wilson in the study of his St Kilda, Melbourne bayside home in early 2016 (Greg Smith)
It’s interesting context to Wilson’s work at Repco Brabham Engines to look at the car he built as a ‘youngster’ before his ‘glory years’ as part of the Maidstone team. The car is both innovative and practical in its adaptation of proprietary parts, a combination applied in his later work.
As the cars current owner Greg Smith observes ‘the Norman Wilson Special is a beautiful study of a late fifties racing car with its Mercedes’ styling and layover engine, side vents and knock-off wire wheels’
‘Norman Wilson Spl’ in the foreground at Templestowe Hillclimb in the outer eastern Melbourne. Pat Hawthorne’s Lycoming Spl behind. The carbs are Webers, sidedraft right-angle alloy castings (Greg Smith)
Norman started his 6-cylinder Holden-engined ‘Norman Wilson Spl’ around 1956, aged 29/30. The chassis is a spaceframe; front suspension Wilson’s using inverted Holden uprights and wishbones, his own cross member and geometry. Steering is rack and pinion. The rear end is a ‘cut and shut’ Holden with an offset diff to lower the driver; springs are quarter elliptics with some neat locating links.
The clever bit was laying the Holden engine over at 30 degrees to the horizontal to lower both the centre of gravity and bonnet line. By the time the car was finished, Norman had moved to Repco, where it was completed and furnished with 3 large, single-throat Webers Charlie Dean bought for Maybach but never fitted to it when that car was fuel injected. The ‘box was Jaguar, the beautiful aluminium body built by Barry Hudson, who also did the Ian Mountain (Peugeot) Spl.
Norman raced the car, mainly in Victoria from 1960-63; it passed through several hands before being ‘chopped up’ in the late ‘60’s. With the interest in historic racing growing, and knowing the historic significance of the car and driver, reconstruction was commenced by Graeme Brown in Adelaide in the mid-1980s; its first run was in 1997. The car is currently being rebuilt by Victorian racer, engineer and raconteur Greg Smith to its precise period spec, from whom this history and photos were provided. There is a whole lot more to this incredibly clever car built by Wilson in his youth. We will do a feature on it when Greg is close to its completion. I’ve seen it; the thing is sensational. Smithy will race it in 2017. I also plan to write more about Norman Wilson’s career; too little is known about this fella, now 91, so important in the Repco story.
Bibliography…
Recollections of Rodway Wolfe and Nigel Tait, Norman Wilson quotes from Simon Pinder’s ‘Mr Repco Brabham’, Doug Nye ‘History of The Grand Prix Car’, ‘Phil Irving: An Autobiography’, Kevin Drages comments from ‘The Nostalgia Forum’, Greg Smith’s photos and details of Norman Wilson and the ‘Norman Wilson Spl’
Photo Credits…
Rodway Wolfe and Nigel Tait Collections, Repco Ltd archive, Autocourse, Digby Paape, David Keep, Bruce Wells/The Roaring Season, David Keep/oldracephotos.com, Automobile Year, Ellis French, David Nash, John Manhire
Tailpiece…
Jack Brabham guides his Brabham BT23A Repco into the Viaduct on his way to victory in the ‘South Pacific Trophy’, Longford 5 March 1967. He takes the first of many ’40 Series’ Repco 1967 wins…
Frank Matich’s 5 litre, quad cam, 580bhp Repco V8 powered sports racer ‘SR4’ was one of Australia’s most powerful and the most successful sports-racer car ever built…
Here Frank charges the big bellowing racer across the top of Mount Panorama during the 1969 Easter Bathurst meeting. The circuit is wild now, it would have been staggering to guide this missile around the circuit then, its surface and safety features, note the proximity of eucalypts on the tracks edge, not quite what they are now!
Paddock shot of SR4, Calder 1969, some of the competition were more recent than this group! (Ian Pope)
Introduction…
Built for the 1968 CanAm series, both the chassis and engine were late so Matich didn’t ever follow up his exploratory 1967 CanAm part-season in his 4.4 litre Repco powered SR3, instead belting the local opposition into oblivion with the SR4 in 1969.
First raced at Warwick Farm on 1 December 1968, Matich won the 3 round 1969 Australian Sportscar Championship with a perfect score; wins at Warwick Farm, Surfers Paradise and Sandown, in 2nd place was West Australian Don O’Sullivan in Frank’s old SR3 Repco. In between he raced in front of thrilled crowds who were drawn to see the fastest car in Australia regardless of category.
Matich leads the pack at Warwick Farm, date unknown 1969, SR4 Repco (Tait Collection)
‘The car was last raced about May 1970 at Warwick Farm, Frank was second to Niel Allen’s Elfin ME5 Chev, he drove the car gently as the engine had a vibration which a subsequent tear down at Repco revealed was the front of the crank cracking’ recalls Derek Kneller, an ex Matich engineer/mechanic from 1969-74. ‘The car was kept under a dust sheet in the Artarmon (Sydney) workshop until after the Tasman Series in 1971 when FM asked us to clean it up, it hadn’t been used for 8 months, we delivered it by trailer, still with the engine fitted, to Repco in Maidstone, Melbourne’.
SR4 was then used as a display piece, never to be raced again until the ‘modern era’ when it was restored by its owner, former Repco engineer Nigel Tait who has had a connection with the car since its construction. This bulk of this article is by Nigel, the photos are mainly from his vast archive of shots of this wonderful, very significant Australian racing car.
This piece is a biggie and comprises numerous parts;
.Historical context for the building of SR4; the earlier SR3 (3 chassis) in particular a summary of its 1967 CanAm program
.Biography of Nigel Tait
.Nigel’s story of the cars design, construction, specifications, race record and restoration
.SR4 specifications
.Etcetera; SR4 related snippets
.How competitive would SR4 have been in the ’68 CanAm had it crossed the Pacific as originally intended, this section designed to stimulate discussion amongst Australian enthusiasts of the period!
.Matich Cars; list of all cars built by FM’s business
Early shot of SR4 when still fitted with a ZF ‘box, LG Hewland fitted later in the year, suspension and engine as per text (Repco)
Frank Matich and Matich Cars…
Matich was one of Australia’s drivers who was as quick as the best in the world during the early sixties Tasman 2.5 Formula when the locals went head to head with the internationals in near enough to identical cars.
Frank then focused on sportscars from 1966 to 1969, as we shall see.
In 1969 Matich returned to single-seaters, F5000 and again proved to be the equal of if not better than the best in the world winning races in Australasia and the US before retiring at the end of the ’74 Tasman Series.
In addition, his team designed and built world class sports and F5000 cars from late 1966 to early 1974. His cars won races after that, John Goss took an exciting 1976 Australian Grand Prix win at Sandown in an A51/3 Repco chassis for example.
A list of the cars Team Matich built is at the end of this article.
I have written some pieces about Frank before, rather than than provide background again click on these links, the best quick career summary is this one, sadly an obituary;
The latter article about the Elfin 400 is the most important in the context of the Matich SR4, the 400 evolved into the Matich SR3, the SR3 to the SR4…
Matich awaits the start of practice, Road America, 3 September 1967. SR3 Repco (Friedman)
Matich SR3…
The first Matich SR3 Traco Olds was built in late 1966 to replace the Elfin 400 Traco Olds upon which it was based. According to some close observers, including at least one of FM’s mechanics the SR3 chassis was ‘tube for tube’ identical to the Elfin 400 albeit strengthened with the learnings of racing the car from the start of ’66 until it was sold to Niel Allen later that year.
The aerodynamics of the SR3 were entirely different to Garrie Cooper’s 400 design and are a function of the 400’s shortcomings and FM’s ongoing absorption of global design and aerodynamic/styling trends. The 400’s ‘aero’ deficiencies are examined in detail in my Elfin 400 article above.
FM a happy-chappy in the Road America paddock, 1967 (Friedman)
This section is not a detailed article about the 3 SR3’s FM’s team built but rather a summary to provide context about the SR4’s build.
The first CanAm Series was won by John Surtees in a Lola T70 Chev in 1966 but there had been professional sportscar races on America’s West Coast back into the 1950’s.
During the 1.5 litre F1 years (1961-65) big brutal ‘Group 7’ sportscars powered by ever increasing in size ‘stock block’ American V8’s thrilled crowds with their speed on both sides of the Atlantic. The best of the worlds drivers contested the races, rich prize money the reward for success in events of 200 miles, GP length, duration.
Frank Matich had ample opportunity to hear first hand during the Tasman Series about the US scene from Jim Clark, Graham Hill, Jackie Stewart, Bruce Mclaren, Phil Hill and Jack Brabham all of whom contested CanAm races, not least Bruce who had also been building Cooper based cars and McLaren/Elvas to contest the races for years.
Matich determined to contest the 1967 CanAm to test his mettle against the best in the world knowing their was little point being ‘king of the kids’ in Oz. The reality is that whilst the domestic single-seater Gold Star competition had some depth, in sportscars their was little at all.
Naked SR3 Repco in the Road America paddock, 1967. Spaceframe chassis RBE ‘620 Series’ 4.4 litre, SOHC, Lucas injected, 400bhp V8 (Friedman)
Repco were also finally selling their engines to customers (as against providing works engines to Brabham with which Jack had contested the ’66 Tasman and won the ’66 F1 World Title) so Frank figured the 4.4 litre, sohc, ‘620 Series’ 400bhp V8 would be a much more competitive proposition than the highly stressed aluminium, pushrod Olds V8 engines he used in the Elfin 400/Traco Olds and his first SR3.
It was a big ask.
McLaren had persevered with the lightweight aluminium Oldsmobile engines until 1966 when he fitted 6 litre cast-iron Chevs to his spaceframe McLaren M1B. His 1967 M6A, a joint design effort between Bruce and Robin Herd were stunning, simple, monocoque cars superbly driven by Bruce and Denny Hulme to 5 wins from 6 races with Bruce taking the drivers and McLaren the manufacturers titles. The ‘Bruce and Denny Show’ rolled on thru to the end of ’71 when Porsche finally ended the party.
Matich raced two SR3 chassis in a limited campaign in the ‘Non Works McLaren’ class!
As a warm-up Matich won the RAC Trophy at Warwick Farm on May 4 and the ‘Australian Tourist Trophy’ at Surfers Paradise on 21 May 1967 from Alan Hamilton’s Porsche 906 and Glynn Scott’s Lotus 23B Ford. The SR3 was Olds powered.
Matich SR3 Repco leads a group of cars, John Cannon in a McLaren M1B Chev the car behind him, Road America 1967. FM retired with a stone thru his radiator on lap 15, Denny Hulme won in a McLaren M6A Chev (Friedman)
The 1967 CanAm started at Road America, Wisconsin on 3 September and finished with the sixth and last round at Las Vegas on 12 November, the well oiled McLaren Team crushed the opposition winning all but the final round which ’66 champion John Surtees took in a Lola T70 Chev.
McLaren deservedly won the title from Hulme despite Denny winning 3 rounds (Road America, Bridghampton, Mosport) and Bruce 2 (Laguna Seca, Riverside).
Matich and his small team contested the Road America, Bridghampton, Laguna Seca and Riverside rounds. Fundamentally the car, sweet handling as it was, was outgunned. Its 400bhp Repco having way too little grunt and lacked the reliability for these Grand Prix length sprints of 200 miles.
At Road America the SR3 qualified on 2:22, 18th to McLarens pole of 2:12.6, retiring on lap 15 with a radiator holed by a stone. In the glorious Hamptons in New York on 17 September he qualified 15th 1:33.49 to Hulme’s 1:29.85, but again DNF this time with fuel starvation.
Frank’s team missed the Mosport, Canada round on 23 September which Hulme’s M6A won.
In California for a couple of races FM gridded 13th at Laguna Seca on 1:05.07 to McLarens blistering pole of 1:02.69, a race Bruce won. Interestingly the Ferrari P4/350 CanAm (a P4 lightened, modified and increased in capacity) did their first ’67 event, Amon finished 5th but qualified behind Matich in 16th on 1:05.77.
Matich and Amon, the latter in in David McKays Ferrari P4/350 CanAm had some sensational scraps that Australian summer in the sportscar races which supported the Tasman Series rounds with the Repco powered car demonstrably quicker than the exotic, long distance derived V12 powered Ferrari.
Matich, wife Joan his mechanics, Peter Mabey at left and Firestone technicians on the Riverside pit apron, CanAm 29 October 1967, John Surtees Lola T70 Mk3B Chev behind. Bruce won the race, Matich crashed and Surtees DNF with ‘rear end’ problems (unattributed)
Still in California, at Riverside on 29 October McLaren won, Hulme was on pole with 1:39.30, Matich 20th on 1:45 and Amon 15th on 1:44.40. Frank crashed out on lap 20. With that the team decamped back to Oz to prepare for the Tasman Series encounters with Amon, with Matich winning each of these battles. Click here for an article on the Ferrari P4/CanAm 350 ‘0858’ inclusive of the Matich/Amon battles;
Jack Brabham, Brabham BT19 Repco and a very young Nigel Tait at the Sandown Tasman meeting, the second race outing for the first ‘RB620’ engine, 2.5 litres in Tasman spec, 27 February 1966. The young engineer had just graduated from the Royal Melbourne Institute of Technology and has ‘landed on his feet at Repco Brabham Engines. Tait maintains this car for Repco all these years later. One of a kind BT19 is Jack’s 1966 championship winning mount (Australian Post)
Nigel Tait…
Having qualified in Mechanical and Automotive Engineering at Royal Melbourne Institute of Technology Nigel commenced work at Repco in 1966 as an Engineering Cadet. His first placement, you can be lucky!, was in the engine laboratory in Richmond where the Repco Brabham engines were built and tested. He helped to plan and implement the move of the Repco Brabham project to another plant, in Maidstone, this involved manufacture of shadow boards for the new machine tools being installed for further manufacture of the racing engines.
He progressed to assist the head engine builder (Michael Gasking) with assembly, dynamometer running of the engines and worked on BT19 (Jack’s ’66 championship winning chassis) when it was being prepared for the ‘620 Series’ 2.5 litre Tasman V8 for Jack Brabham to use at the ’66 Sandown Tasman meeting. He also worked with other project engineers on test and development of the range of engine components being manufactured at the various engine parts manufacturing factories of the Repco empire for fitment to the race engines.
These project engineering tasks continued for some years and included a 4 month transfer to England to work in some of the companies to which Repco was licensed.
By the mid 70’s Nigel was running the engine laboratory in Richmond, which had become the Repco Engine Technical Centre. In conjunction with the University of Melbourne he supervised a major Federal Government contract for the testing and evaluation of diesel and petrol engines running on alcohol fuel mixtures. He also spent some years as chief engineer of the engine parts plant at Richmond before returning to the engine laboratory, which became his base as Chief Engineer of Repco’s Engine Parts Divison.
He was closely involved with original equipment product development and sales to local car companies and travelled throughout Australia and New Zealand extensively giving product knowledge lectures and writing technical articles. He made a significant contribution to the engine component design sections in the Repco Engine Service Manual (later to be reissued as the ACL Engine Manual).
The division was sold to a management buyout group in 1986 and became ACL (Automotive Components Limited). Nigel was one of the 9 in the buyout group and continued in the role of chief engineer until his retirement in 2005.
The Matich SR4: One of Australia’s most famous and successful racing cars. Here Matich slices the car, with typical pinpoint accuracy into Warwick Farm’s Esses, 4 May 1969. Interesting in an historic context, hi-wings were banned during the Monaco GP weekend of 18 May…
Overview..
Frank Matich had already won the Australian Sports Car Championship four times by the time he commenced work on the SR4; he won in a Lotus 19 in 1964, Elfin 400/Traco Olds in 1966 and in the Matich SR3 in 1967/8.
He had competed in the USA in 1967 as recounted earlier. His dominance of sports car racing in Australia was legendary and led to the catchphrase: ‘Doing a Matich’. (Pole position, winning, fastest lap time and lap record). Frank’s record with the SR4 is impressive. He raced at Bathurst, Calder Park, Catalina Park, Sandown, Surfers Paradise and Warwick Farm.
SR4 took nineteen starts for 15 wins, one second with eight outright lap records and winner of the 1969 Sports car Championship.
SR4 Owners..
Rothmans Team Matich (1968-1970), Repco (1970-1986) Automotive Components Limited (1986-2005) and Nigel Tait (from 2005)
SR4 in Repco’s Maidstone, Melbourne workshop in 1971, great shot of the nose/spoiler assy and carefully ducted, both ‘in and out’ of radiator, suspension as per text. Note front lights mandated by Oz rules (Jay Bondini)
Build, sponsorship and first ownership..
It’s not certain who actually owned the SR4 as built. It was constructed at Frank Matich’s workshop in Sydney and as far as I know largely funded with sponsorship from Rothmans (tobacco) and perhaps others. The engines belonged to Repco.
Some time after the first logbook was issued from CAMS it was mislaid and Frank wrote to apply for another, stating ownership as ‘Rothmans Team Matich’. In his book ‘Historic Racing Cars in Australia’ John Blanden wrote that ownership transferred to Rothmans while the car was still in competition, that’s the period from December 1968 to January 1970. It’s also known that Rothmans made a practice of owning the cars that Matich raced under their sponsorship.
The car was retired in early 1970 so that Frank could concentrate on F5000. Repco wanted the car to use as an advertising tool and in return, it is my understanding, that an arrangement was made for the car to be transferred to Repco’s ownership in return for ongoing supply of engines and sponsorship for F5000, these being made at the old Repco Brabham plant in Maidstone. (That’s where I started work for Repco in 1966 as a cadet engineer). This division was renamed Repco Engine Development Company (REDCo) under General Manager Malcolm Preston.
Frank Hallam, Repco Brabham’s General Manager, and incidentally my first boss, had by then been transferred to Repco Research, and one day acidly described to me his life out there as ‘a career careering between obstacles’. He wasn’t happy about being put out to pasture.
Shot as above after delivery to Repco in Maidstone, Melbourne. Note wing spec then, it would be interesting to know which meetings it competer in this spec, noting changes were ongoing apart from those mandated by the FIA from the ’69 Monaco GP weekend, hi-wings banned from then (Jay Bondini)
Anyway, the car was sent down from Sydney to Repco in late 1970 (I was working for Repco in England at the time so can’t be sure of dates) and was first placed at the Repco Apprentice Centre in North Melbourne. Then it was sent to Maidstone to rest, for some years, in a room next to the REDC0 drawing office. It was in a forlorn state with an empty engine and at the time of little interest to Repco or anyone really.
Anyway once REDCo had closed down after F5000 had finished (at least for Repco) I had the car and all of the Repco Brabham/REDCo drawings and files and other hardware transferred to our Richmond engine laboratory that I supervised. Another division of Repco was to occupy the Maidstone building but not the two engine dynamometer cells, which I was to run, not very successfully as it turned out, on a commercial basis.
By that time Don Halpin had transferred from the Maidstone plant of Repco Engine Parts to our Richmond laboratory and he undertook a cosmetic restoration of the car so that Repco could use it for trade displays and shows etc. It was not a running vehicle at this stage since there was no engine, only a few parts to make it look OK.
Various divisions of Repco used the car for displays as intended and the car also spent quite some years on public display at the Birdwood Museum in the Adelaide Hills, and then the Auto Museum in Launceston, Tasmania.
BP advertisement photo is pit straight, Sandown Park, Melbourne (BP)
From Repco to ACL..
During the early 80’s Repco underwent considerable change in its upper management and ownership. (You could read ‘corporate raiders’!). By about 1985 Repco had sold off some of its manufacturing divisions, Repco Research, the Brake and Clutch Division and the machinery manufacturing division and it became clear that manufacturing was of no interest to the Board. Clearly the factories manufacturing engine parts in Melbourne, Brisbane and Launceston were next to be offloaded. Indeed while the Repco Board instructed the Divisional General Manager of this division to advise his staff that it was not for sale, it on the other hand instructed him to find a buyer!
So in August 1986 a management buyout team comprising 8 of its senior staff (including myself), and our Divisional General Manager, purchased the whole division from Repco. At a price of $A28 million and with very little equity and huge borrowing, the team pulled off what was the largest management buyout of its type in the country’s history. There were almost 1,000 employees spread over 5 states. My role was to continue as chief engineer.
The new company adopted a name that was actually one of Repco’s 1960’s takeover targets, ACL, and the new company became ‘Automotive Components Limited’. (Repco had no need to use this name and allowed its use by us).
All of the assets of the then Repco Engine Division were transferred to the new company, these included the Repco Brabham BT19 and all associated drawings, items and trailer and also the Matich SR4 which was still in its cosmetically restored state. So the Matich became the property of ACL from August 1986. ACL continued to display the car publicly including the museum in Launceston and other venues.
SR4 in the Birdwood Museum, Adelaide Hills, at this stage the ‘cosmetic’ restoration had been done by Don Halpin as per text, car not ‘a runner’ (The Roaring Season)
Niel Allen’s ex-Matich Elfin 400 Chev (named Traco Olds by Matich) ahead of FM’s SR4 and Bevan Gibson’s ill-fated Elfin 400 Repco, sadly Bevan died during this race, Easter, Bathurst 1969. This event is reported in full in the Elfin 400 article, a link for which is at this articles outset (Dick Simpson)
An engine was found..
Towards the mid to late 90’s with the growth of interest in historic racing there were numerous approaches made to ACL to buy it. These were made direct to the Board or sometimes to myself, and always we advised that the car was not for sale, but would be restored once an engine could be located.
Luckily that did happen. Aaron Lewis, who is prominent in historic racing circles and the owner of some magnificent cars, advised me that Les Wright of Sydney had a 4.2 litre Repco Brabham engine in his Brabham Buick. CAMS had advised that this was not the way the car was originally raced and that Les would need to remove the engine and obtain the correct Buick engine to obtain a CAMS permit to race the car. On behalf of ACL I bought the engine for $30,000. Les ran it on the floor and it worked pretty well so was transported to Melbourne. This was circa 2000.
At last we had an engine and I was able to have the car brought back to life. Jim Hardman (ex F3 racer, mechanic, engineer and builder of the superb Hardman F2 cars of 1980) undertook this restoration, which was essentially to make it mobile, look good and be safe for display and demonstration running. This work was undertaken by Jim at his rented area within Heckrath Engineering in Cheltenham and paid for by ACL.
I sent the body to Richmond TAFE who had offered to spray it. It turned out to be a very poor job where even the colour was wrong and I had to engage a panel beater near us at Maidstone (Houdini) to do it again. More about the colour later.
Once in running condition at Heckraths Jim Hardman became the first person to drive the car for over 30 years. Albeit this was in Bricker Road, Cheltenham on a quiet weekend morning, a quick blast lest the local police took interest! More ‘legal’ trials were held at Calder in outer Melbourne, with Jim doing most of the driving though I squeezed myself into it several times.
Subsequently the car was displayed many times from around 2002 to 2005, at Motorclassica, the Australian Grand Prix, various circuits and trade shows and even at a Repco function.
Jim made up a seat for me and I took it to several meetings at Eastern Creek, Winton, Phillip Island etc and we also used it as a display vehicle for our numerous company functions. When Jim drove it at Phillip Island it dropped valves in both heads (probably stones down the intakes) and we had to undertake a fairly extensive rebuild. (Not having wire screens on the inlet trumpets was a bad mistake, as others have also learned).
Repco engine assy area, Maidstone factory, Melbourne in early 1968, the engine towards the front is a 3 litre ‘860’ F1 engine, behind are ‘760s’, capacities unknown (Repco)
Engines..
The whereabouts of the original 5 litre ‘760 Series’ engine used when Frank Matich raced the car is unknown. I doubt that it came back to Repco. There is some suggestion that it resides somewhere as the base of a coffee table and I hold out hope that one day this engine might come to light, if only as an important part of the car’s history for the next generation.
4.2 litre: I’ve already explained how we came by the 4.2 litre engine ex Les Wright. The 4.2 litre ‘760 Series’ quad cam engines were made only for Indianapolis for Jack Brabham and for Peter Revson. I think there may only have been two or perhaps three, the records are not clear. The engine in the ex Revson BT25 of Aaron Lewis is undoubtedly the one from that car. Sir Jack Brabham told me that one of his engines used in his 1968 BT25 Indy car that he lent to Goodyear ‘disappeared’ and I have a feeling that the engine I have might be this one.
It is as original though as a result of the dropped valve at Phillip Island one of the bores had to be honed slightly oversize to remove some marking and hence the piston and rings in this cylinder are a little larger. Otherwise the engine is as run by Les and still has the same cams etc. It runs on Avgas. I use 50 cc of two stroke oil per 20 litres of Avgas for lubrication of the metering unit.
Its output would be around 550 BHP at about 8,000 RPM but I have never pushed it beyond 6,500 RPM. I have rebuilt it a second time just as a check and little work was needed.
Peter Reilly assembling an ‘860’ 3 litre F1 engine valve train assy, the engines problem area!, refer to the text, beautiful workmanship clear. ‘860’ the only gear driven cam engine, ’20 and 40′ Series driven by chain (Repco)
5 litre: Some years ago I discovered that I had enough parts from which to commence build of a 5 litre ‘760 Series’ engine. I had a block of the right type (to take the Cooper rings rather than head gaskets). Crankshaft Rebuilders made sleeves and a crankshaft, rods were made by Argo, pistons by Special Pistons Services and the heads that I had were completely rebuilt at Head Stud Developments. Luckily I had the gear casings all of the gears (the quad cam engines have gears, not chains) and a spare sump of the right type with integral oil pressure and scavenge pumps.
Build of this engine took me about 2 years including the time for manufacture of the parts by Crankshaft Rebuilders. A much larger than original torsional vibration damper was made for me by Tuffbond in Sydney. Minimizing crankshaft torsional vibration protects the valve gear and camshafts etc. as well as being better for the crankshaft itself.
Actually the engines used by Frank were of 4.8 litre capacity, the bores being reduced slightly to overcome sleeve cracking due to being too thin. I have made my engine to true 5 litre capacity with the steel sleeves and was able this way to utilize off the shelf ring sizes. Also I had the rods made to 6” length which enabled the use of much shorter and lighter pistons in keeping with modern engine design practice.
The result is a very nice engine with noticeably more torque. Though I have not had it on a dyno it would no doubt see around 600 BHP, though as with the 4.2 I do not use any more than 6,500 at which point the cams are in and there is plenty for me!
The 5 litre encountered what I thought was a mild overheat at Geelong* in 2014 so I have rebuilt this over 2015/6. There was no bore damage but the crankshaft needed grinding and otherwise the engine is in good condition and ready now for further use.
*Note: I have learn’t that apart from needing a better bleed for the cooling system (now done) I have let the engine rev too slowly upon first start up. The water pump speed is only half engine revs so now I run the engine at 2,000 RPM from any cold start to make sure the coolant is flowing properly.
Reverting to the 4.2 litre engine in Aaron Lewis’ BT25, it is currently in build and it would be nice to see it running. (at the time of uploading this article Aaron has run the car at Eastern Creek, Sydney) At this stage the two quad cam Repco Brabham engines (and now Aaron’s) that I have for the SR4 are the only Repco quad cams that run, anywhere.
I have nearly enough parts to commence a third engine build but this would have to be with a block that uses head gaskets and these would need to be re-torqued thus would need either a dynamometer run or engine removal from car after first run. Or with luck I’ll find another Cooper ring type block.
Sale from ACL to Nigel Tait..
I was still hard at work as ACL’s Chief Engineer up until my retirement in July 2005. Consequently outings with the car and indeed also the BT19, were rare and had to fit in with my work rather than being at my will.
With retirement imminent it became obvious that with no one else at ACL interested in the two cars we’d have to consider their future. Repco had a first option to buy BT19 and it was decided to sell this back to them around June 2005, for $1.3M. I had been looking after it since it was bought from Jack Brabham in 1970. Repco asked if I would continue to be its carer/minder, which I do to this day.
The Matich was to be sold and my bid was the highest, thus securing for me a car that i’d been looking after virtually since its acquisition by Repco. I paid my company $160,000 for it and the various spares and display material and engines, (including the 3 litre quad cam ‘850’ diagonal port engine). I also purchased the trailer that was made for us by MRT Trailers, for $10,000.
Spaceframe chassis back at Jim Hardman’s shop after sand blasting and stove-enamelling (Tait)
As earlier mentioned the first restoration by Don Halpin was to allow the car to be on static display.The second, once we had the engine from Les Wright, was by Jim Hardman and resulted in the car’s first outing in 30 years.
Once I had purchased the car in 2005 Jim advised that we should undertake a complete bare frame restoration and rebuild. Jim still had the facility at Heckrath’s and i was able to devote some time to the menial tasks such dismantling, cleaning the frame ready for spraying and running around getting parts etc as needed.
Chassis, big and butch to take the big Repco’s power and torque, quoted weights of ’68 McLaren M8A and Matich SR4 similar. Given the Repco engine was way lighter than the ally’ block Chevy of the M8A, the difference in weights is a bit of a mystery as Tait quotes the Matich bare frame at 38Kg (Tait)
Hardman replaced all of the aluminum skins, undertray, all firewalls etc and repaired and strengthened the frame as needed. In fact there was no real problem with the frame, one part of the outrigger on one side had partially cracked and the bar that was the top mounting for the seat belt upper harness was too small. Everything else was terrific. A great testament to its builder, Henry Nehrybecki. I photographed all stages of the restoration and rebuild which took exactly 6 weeks from the May Winton meeting to being ready for Speed on Tweed later that year.
Wishbone front suspension, coil spring/Armstrong damper and ventilated front discs, steering rack also in situ, Matich designed, CAC cast (Tait)
Big radiator in place, 3 pot calipers are Girling (Tait)
Front suspension, radiator and ducting detail, quality of workmanship clear (Tait)
Heart of the matter in place as is Hewland LG600 ‘box, car first raced with a ZF. Rear suspension period typical; single upper link, lower inverted wishbone, coil spring/dampers (then Koni now Armstrong) and twin radius t rods for fore and aft location. Note big oil reservoir and beefy rear chassis diaphragm above ‘box (Tait)
And now the body (Tait)
Proud custodian Nigel Tait with SR4. Jim Hardman an outstanding race mechanic/engineer and car builder ‘in period’ and now a restorer of similar calibre (Tait)
The view of FM’s SR4 derriere all the other drivers saw (Tait)
Australian Champion driver John Bowe aboard SR4 at Calder (Tait)
Multiple Australian Champion John Bowe expressed interest in doing a track test for ‘Unique Cars’ magazine.This was shortly after our 2006 rebuild. He planned on a run at Calder for this but that day could not be scheduled as intended. Instead John’s first drive of the car ended up on the road circuit at Murwillumbah’s Speed on Tweed. Organised by Roger Ealand, who so sadly we have just lost, this event ran for several years and in fact culminated in its final event with a stage of the Repco Rally being held also on the same circuit, but at night.
John drove the car for its 4 or 5 runs but even after the first he requested some suspension changes, which had an immediate effect. Subsequently John’s planned track drive at Calder came off and he drove numerous laps following a camera car and some at speed. A successful day and John loved the car. His only request was for the height of front and rear to be changed to change the undertray height to be higher at the back to improve downforce.
My Licence.
I have a level 2S licence. In my earlier days of racing it was the equivalent of a Level 1, but some 25 years ago I lost one eye resulting from an infection during a skiing holiday in New Zealand. That’s one reason why my driving is limited to display regularity and super sprint etc but the other reason is quite pragmatic; there are few drivers around, and I’m not one of them, who could handle this car to its full potential. With over 600 BHP and a weight of just 625kg the car commands great respect.
Start of the fateful race which took Bevan Gibson’s life, Easter, Bathurst 1969. Gibson in Bob Jane’s red #6 Elfin 400 Repco, Niel Allen #2 alongside in his Elfin 400 Chev and Matich to the right in the hi-winged SR4 (Wayne McKay)
Contact with Frank Matich..
I took the car to Eastern Creek in Sydney on several occasions in the years before and after its bare frame restoration in 2006.
Frank was at some of these meetings and was delighted to see and hear it in action. He was full of praise for the standard of the restoration and for my efforts in bringing it back to life. We spent quite some time discussing technical aspects of the car and he noted that someone had replaced the Koni shock absorbers with Armstrongs, a pity he said because he set the Konis with very little bump and mostly rebound, something that I can’t do with the Armstrongs. Frank was apologetic that somehow his people had done a cleanup in his factory and had discarded many spares including patterns and wheels etc that he would have given me. These were good conversations and it was fun also to meet his daughter Katrina and his granddaughter Paige and to have photos of all with the car. He said that he was glad the car was in good hands.
Unfortunately relations deteriorated somewhat in Frank’s latter years when he claimed that he had not sold the car to Repco and wanted it returned! This after a period of over 30 years since Repco’s acquisition during which there had been no communication from or to Frank and with the car having been through two changes of ownership.
Subsequently Frank’s attention was drawn to the reference in John Blanden’s book stating that ‘It initially ran with Rothmans signage and subsequently Rothmans acquired ownership of the car’.
There was no further communication on this issue. It was disappointing but didn’t diminish my admiration for Frank as a brilliant driver and one of the great legends of Australian motor sport. To this day I can recall the car running at Sandown and steaming into Peter’s corner (I was an official there) with all brakes locked up, tyres smoking when the throttle had apparently stuck. That was a great era.
Matich ‘locks em up’, a stuck throttle the cause, on Sandown’s pit straight just before Peters/Torana corner in 1969 (Tait Collection)
Henry Nehrybecki..
Henry was the builder of the car, at least the chassis and suspension and no doubt he had a team of helpers. Indeed I’ve heard that some of the time during the build Henry was not well and Bobby Britton (of Rennmax Engineering) may also have been involved.
I had numerous discussions with Henry in the early days after we got the car going and took it to Eastern Creek. He was thrilled the car was back in action after being out of circulation for 30 years. A small coincidence is that Henry’s granddaughter Gabrielle lives in Melbourne and is in the same friendship group as my daughter and her friends.
Derek Kneller; ‘Henry drew and fabricated the chassis, the conceptual design of which was Frank’s and his, Bob Britton was also involved. The chassis was then transferred to Franks facility, the Castle Cove BP Garage in Eastern Valley Way, which comprised a ‘servo’, the race ‘shop and Firestone racing tyre warehouse. It was in late ’69 that FM switched from testing and selling Firestones to Goodyear’.
John Mepstead and Matich ponder the SR4’s brakes in the Sandown paddock after its big brake lock-up. Mepstead an ex-Repco mechanic/engineer hired by FM to look after the car in ’69 (Tait Collection)
‘Peter Mabey assembled SR4 at Castle Cove, he had been with FM for some years including the SR3 race program in the ‘States. After that Peter looked after the Servo side of the business before returning to the race side of things on the F5000 program with me. SR4 was maintained and race prepared in 1969 by Tony Williams and John Mepstead on the chassis and engine respectively’.
Others to drive the Matich SR4..
Apart from Frank there have been no others to drive it in any competition except John Bowe and Laurie Bennett. We will not count my many demonstration drives, super sprints and regularity events and even in the Top Gear event at the Melbourne Showgrounds.
As earlier mentioned John drove it at Speed on Tweed just after its 3rd restoration. Laurie drove it at Mallala in one Super Sprint. His Elfin 600 had expired and I let him take it out. Effectively he won this having started last on the grid and passed all of the others by the last lap, while being stuck in 2nd gear.
Bill Hemming and David Hardman (Jim’s son) also enjoyed some practice laps at Mallala and Winton respectively. Also Brian Sampson who would have loved to own the car took it for a few laps at Winton after the third restoration. He really enjoyed it however we had a problem with a badly set up throttle mechanism which made it difficult to drive.
On the Calder dummy grid in 1969, #34 an Elfin Streamliner (Ian Pope)
The body was made in Sydney by JWF Fibreglass. It was not intended to be this way. The plan was for it to be made from aluminum and they went a long way towards completing this but the task became too hard and too slow. What had been made was used as a mould for the fiberglass body. This was one of the reasons the car didn’t go to the 1968/9 CanAm, the other was that Repco was late with the engine.
When we restored it at ACL it was strengthened with some extra layers internally as it was very flimsy and cracked in many areas. It’s a little heavier but still OK.
I’ve mentioned earlier the colour. After the debacle of the Richmond TAFE attempt we’d lost the original colour since every panel was by now the odd purple colour, so there was no colour match possible. Houdini Panels suggested an off the shelf colour common to a road car of the time and as it looked more vibrant and could be retouched more easily I chose this.
It appears there were two bodies, or at least two rear sections. When the car raced at the Easter Bathurst meeting Frank had the very high wing and it was attached to the rear hubs by uprights that went through holes in the body. After Bathurst the car reverted to low wing, no wing and various iterations in-between, but always body mounted. The wing on the car now is about 300mm above the rear deck and I am not sure if the car competed in this way or if the wing was experimental in the latter stages of the car’s life with Frank.
Just last December (2015) I found another rear body section for the car. It came to light in an outer suburban junk yard along with the body from Colin Hyams’ T190 Lola F5000. How these came to be at this property is something we’ll never know. Anyway I bought the Matich rear body (for much more than it is worth), as it is definitely the one Frank used at Bathurst, with the holes for the wing supports and is the original dark blue. It still has the Repco and other stickers on it. I don’t intend to use this but it would fit straight on still having the original brackets.
Chassis number..
The chassis was number 07. When I decided to have a brass plate made I asked Henry if he knew what the chassis number was and he advised it was number 1 so I had the plate made this way. He was probably referring to the fact that it appears another chassis was made, very similar to mine, but never actually made into a car. So Henry was thinking about SR4 chassis of which mine was the first. I suppose I could re-engrave the plate on my car.
SR4 in the Surfers Paradise paddock, note the car is now fitted with a Hewland LG500 ‘box rather than the ZF in the earlier rear shot (Tait Collection)
Gearbox..
The car was made with a ZF. It seems the side plates of this gearbox were not strong enough and also the 4 speed Hewland LG500 that replaced it was more common at the time and ratio changes were easier. There is a reverse but to set up the adjustment to get this compromises engagement of the forward gears so it does not go into reverse at all. I don’t have any spare ratios. The only places 4th gear is used is at Eastern Creek, Calder, briefly, the back straight at Pukekohe, NZ and the Grand Prix circuit at Albert Park. Also Sandown and Phillip Island. Given a good straight the car would reach 200 mph.
Derek Kneller; ‘I helped fit the Hewland LG gearbox to SR4. We were converting Frank’s F5000 M10A McLaren to M10B spec, i built the first of these at McLaren’s before leaving the UK for Oz. A DG300 Hewland was fitted to the M10A, the LG was popped from the M10A into SR4. Henry Nehrbecki fabricated a new rear cross-frame with a bellhousing designed by us and cast by Commonwealth Aircraft Corporation in Melbourne, we made a pattern which we could adapt for a Chev or the Repco. The change in ‘box was around November 1969’.
Tyres..
Very early in the piece Kris Matich (of Goodyear in Sydney) tried to find tyres of the original size as raced by Frank but these were no longer available. I have used Avons, supplied by Russell Stuckey and they are F5000 fronts (with treads cut by Russell) and a sports car category treaded tyre imported from Japan. The sizes are: Front: 10.5/23/15 Rear: 15/26/15
These are a little smaller in outer diameter than raced by Frank and we have set the suspension up to suit. Any difference in ratio is of no consequence.
FM after winning the ASSC round at Surfers Paradise on 18 May 1969, time for a new set of raceboots Frank! Note air reliefs atop SR4 RHS guard (Tait Collection)
Roll bar..
The roll bar height is too low for me since my seat was made for me to sit further away from the pedals. It was marginal in height for Frank. For my purposes it is OK but will need to be rebuilt in accordance with CAMS standards in due course. I think this will require a bare frame exercise.
Brakes..
These are as raced but I have slightly softer pads for quicker warm up. John Bowe felt that these might be too soft for serious racing.
Fuel tank..
The car was raced with a large bladder tank in the left pod. This was not serviceable, Jim Hardman made an aluminium tank of about 30 litres capacity and foam filled it. The car uses about 1 litre per kilometre so a larger tank would be needed for any serious racing.
Ignition..
A Lucas Opus system was on the 4.2 engine ex Les Wright though most likely Frank raced with a Bosch twin point distributor. The Opus modules are no longer serviceable. John Heckrath made up a special distributor so the Bosch module could be hidden inside the Opus unit and this worked well. There was some initial hilarity when it was discovered that the donor distributor from a V6 Holden had the wrong number of teeth for a V8! (The timing was only ever right for the first few degrees of engine rotation and had to be retimed numerous times until the oversight was discovered). More recently Performance Ignition made up a Scorcher system and this now works perfectly albeit is not as the car was raced.
Cam covers..
The car raced with cam covers designated ‘REPCO’. I built my 5 litre engine accordingly but the 4.2 litre engine, being ex Jack Brabham Indy, had ‘REPCO BRABHAM’ cast onto the top. I’ve chosen to leave it this way, i have spares of both types. (An early photo shows the car with Repco Brabham cam covers and also shows the ZF gearbox).
CAMS Certificate of Description (Australias more rigorous equivalent of FIA historic racing certification)..
For what I do with the car a C.O.D. is not needed but I was persuaded that it would be a good idea to have this so the car could be documented as raced, for future reference. A C.O.D. was obtained in 2015. It is # 0.040.03.02.
New Zealand
I have taken the car to New Zealand twice, both times to Hampton Downs, and on the first occasion to Pukekohe as well. I was included in the demonstration events on each occasion and had plenty of track time with F5000’s and other sports cars. This was especially so at the most recent of the visits to Hampton Downs where there were so few of the big sports cars entered they needed me to make up numbers, at least in the practice, qualifying and even on the warm up lap of every race! The two events were to celebrate Bruce McLaren and Denny Hulme respectively.
Importantly the Matich ran very well and was popular with the locals.
Future..
My plan is to continue with displays and demonstrations, regularity and Super Sprints as much as possible given my other passion, snow skiing. This sidelines me for most of the winter months in our small apartment at Mount Buller. I hold out hope that I can get the roll bar rebuilt soon, the 5 litre should go back in later this year and it would be nice to make another trip to New Zealand.
My longer term mission is to see the car in the hands of someone with the necessary technical ability, driving skill and passion to continue to present the car, whether racing or not, in the manner that reflects the great legacy for its terrific driver, Frank Matich and Repco for its amazing engines.
Nigel Tait June 2016
This card, and the shot just below was produced by Repco and handed out at race-meetings trade shows and the like in period (Tait)
Matich SR4 specifications…
Engine: Repco Brabham quad cam. Repco designed and manufactured ‘700 Series’ aluminium crankcase/block cast at Commonwealth Aircraft Corporation, Fishermans Bend, Melbourne.
Four valve per cylinder, DOHC, gear driven, ’60 Series’ aluminum heads designed by Repco and cast at Castalloy in Adelaide.
Lucas mechanical fuel injection system with metering unit driven from the same jackshaft which describes the distributor Port mounted Lucas injectors running at 100psi. Throttle slides for engine control.
Ignition: car was originally raced with a Bosch twin-point distributor, later Lucas Opus and now Scorcher with reluctor in the distributor
Lubrication: pressure and scavenge pumps in the sump interconnected with short shaft, driven from the crank. Oil tank external
Crankshaft made by Crankshaft Rebuilders, Forged pistons by Special Pistons Services, Connecting rods made by Argo, NSW.
Capacity: 4.2 litre ‘Indy’ version Bore: 96mm Stroke 71.9mm
Capacity: 4.8 litre as raced by Matich in 1969: Bore 96.5mm, Stroke 82mm
Suspension: Front; Lower wishbone, upper camber arms with radius rod. Rear; Reversed lower wishbone with upper camber arm and upper and lower radius rods. Shock absorbers: now Armstrong but raced originally with double-adjustable Koni’s
Steering: Matich manufactured rack and pinion, cast by CAC. Uprights: Matich design and manufactured, steel fabrications
Brakes: Girling, 3 pots per wheel
Wheels: Matich design cast magnesium, front 10.5 by 15”, rear 17” by 15”
Tyres: Avon, front 10.5” by 23” by 15”. Rear 15” by 26” by 15”
Track: front 57”, rear 60”, wheelbase 90”
Body: Fibreglass, manufactured by JWF in Sydney.
How competitive would the SR4 Repco have been in the 1968 Can Am Series?…
In ’67 the dominant McLaren M6A weighed 590Kg/1300lbs and was powered by a 6 litre 530bhp Chevy, the ’68 M8A by a 7 litre 620bhp alloy block Chev, the car weighed circa 1350lbs.
On the face of it FM’s ‘760 Series’ 5 litre, 4 valve, DOHC Repco V8 toting about 580 bhp, the car quoted at 1361lbs would have been ‘in the hunt’. Certainly in relative terms SR4 would have been more competitive than the ‘620 Series’ 4.4 litre, 2 valve, SOHC 400bhp powered SR3 was in 1967.
Whilst the Repco V8 was giving away some power to the Chev, the car similar in weight to M8A, the Matich was potentially a better handling car than M8A given the distribution of the weight. The Repco alloy V8 weighed about 380lbs, the Chev lump circa 550lbs. There was no question about the handling of the Matich cars; ask Chris Amon who’s beautiful handling P4/CanAm 350 Fazz V12 was beaten by Matich in SR3 soundly on every occasion they met during the Australian Tasman rounds in the summer of ’68.
The engines had to last the 200 miles of a CanAm event of course, the Repco ‘860 Series’ F1 engines having major problems in 1968, mainly valve gear related. RBE Project Engineer Norman Wilson’s account of the engine problems in F1 in 1968 is as follows; ‘On a visit to Cosworth after the 860 engine problems Cosworth partner, Mike Costin, said that he realised what our problem was with the valve gear, that it was torsional vibration’.
‘This is where the project started to get unravelled. Frank (Hallam, GM of Repco Brabham Emgines) had sort of admitted the problem but at the time i think Frank had just about left, and Charlie Dean who replaced him wouldn’t understand that the problem was a torsional vibration problem. It was wrecking the cam followers. And the solution to the problem was fairly simple. All we had to do was modify the cam drive like the Cosworth Ford DFV engine and we could have fixed it’.
‘What happens is at certain speeds the front of the camshaft will tend to go a little bit like a tuning fork and as it rotates this front of the crankshaft oscillates back and forth and this oscillation is transferred up through the timing gears. It was making two of the camshafts do the same thing. So when the cam lobes were going around they were ruining the cam followers. The Cosworth has a little spring gizmo in the first timing gear to absorb this so it is not transmitted through the whole system. And Frank realised we needed something like this and we were working on doing that when Charlie Dean arrived on the scene and said it was a lubrication problem.’ This was after the end of the 1968 F1 season mind you, Hallam resigned after Deans arrival, after that disastrous season.
The ‘760 Series’ 4.2 litre, 4 valve, DOHC Repco V8 Indy variant with the same block and heads as the 5 litre finished the Indy 500 in 1969, Peter Revson’s Brabham BT25 finished 5th in the race won by Andretti’s Hawk Ford. Critically, Peter Revson took the only international win for a ’60 Series’ engine when we won the Indianapolis Raceway Park road event in his Brabham BT25 Repco on 27 July 1969.
None of these engines were fitted with the torsional vibration damper or spring gizmo to which Wilson refers. Its said the the bigger ‘760’ engines were simply not revved as hard as their F1 liddl’ ‘860’ brother thereby avoiding the oscillation rev range which was problematic.
For Australian enthusiasts a great ‘mighta been’ is how FM would have gone against the mighty papaya ‘Big Macs’ in 1968?…
Would the SR4 have been quick? You betcha, much faster than SR3. Would the ‘760 Series’ engine have finished 200 mile races? Yes again if the similar Indy variant results in ’69 are a guide. Could SR4 have achieved CanAm podiums in ’68?, probably yes.
Could he have won a race? Maybe, if the planets were aligned noting that year the ‘dynamic duo’ didn’t win two rounds; John Cannon took a great victory in the wet in an old M1B McLaren at Laguna and Mark Donohue at Bridghampton in the Penske M6B when both Bruce and Denny had major engine failures. Could FM have prevailed at these events? Sure, SR4 was quick enough to knock both car/driver combinations off.
‘If yer Aunty had balls she’d be yer Uncle’ of course, ifs, buts and maybes mean nothing in motor racing, as in life. The chassis was late. The engine was late. FM didn’t contest the ’68 CanAm and as a result we were all deprived of seeing Matich take on Bruce, Denny and the rest of the CanAm circus all of whom he knew and respected well.
So Frank raced the car in Oz in ’69, crushed the local opposition and then moved into F5000 supported by Repco…
Rothmans brochure featuring both the old, SR4 Repco and the new, McLaren M10A Chev F5000 in 1969 (Tony Johns via Nigel Tait)
The obvious question is, having missed the ’68 series why didn’t the car contest the 1969 CanAm instead of being ‘King of The Kids’ in Oz?..
The answer is simple, the Repco Brabham engine program was over, Jack raced a Cosworth DFV in F1 in 1969, the final races in that partnership the Indy races in 1969.
The Repco board decided to close down Repco Brabham Engines Pty. Ltd, there is no certainty Repco would have committed to F1 in 1969 even had Jack wanted them to. Cost was a big issue for Repco throughout 1968, the failure of the engines that year made it easier to withdraw, particularly given the sort of investment which would have been needed to match the reliability and power of the Ford Cosworth DFV. Its impotant to remember that Rindt put ‘860 Series’ F1 powered Brabhams on pole twice in ’68. The 3 litre ‘860’ Repco was potent! With further development there is no reason the ‘860’ F1 engine could not have won races, it proved its speed in Rindts hands in ’68 if not its reliabilty. And every Tom, Dick and Harry raced DFV’s in ’68; McLaren, Lotus and Ken Tyrrell’s Matra International team, pole amongst that lot was an achievement, the Ferrari’s also quick that year.
So, whilst Repco were happy to provide Matich with an engine, they would not back an assault in the US with the resources required. Matich employed ex-Repco engineer John Mepstead to look after SR4 during ’69, he wasn’t provided by Repco. Matich didn’t have the funds to race in the US and had already acquired an M10A Chev McLaren F5000 car in advance, well in advance of CAMS decision to agree the next ANF1 as F5000. 2 litre F2 was the alternative.
There was some ‘dogs bollocks’ from the Matich camp at the time about ‘multi-valve’ engines not being legal in the ’69 CanAm which is rubbish, obfuscation. Count the number of Ferrari’s alone which ran that year, the last time i looked they weren’t powered by pushrod OHV V8’s.
Repco’s commercial interests were best served, they quite rightly believed, by building an F5000 variant of the 5 litre Holden V8 to participate in this rapidly growing category. The engine was an immediate success, Matich won the 1970 Australian Grand Prix in a McLaren M10C Repco that November.
There was not the funds to race an SR4 ‘Stateside, customer F5000 engines were a better commercial proposition for Repco and so an interesting and immensely successful, Repco Brabham Engines Pty. Ltd. chapter of Repco history ended, with a big, quad cam 5 litre bang mind you!
As an aside the last championship won by an RBE engine was Henry Michell’s victory in the 1974 Australian Sportscar Championship aboard an Elfin 360 powered by an ex-Tasman RBE ‘730 Series’ 2.5 litre V8…
The SR4’s 1969 Australian Competitor Set…
The sinfully sexy, wedgy, state of the art, but oh-so-twitchy Elfin ME5 Chev of Niel Allen at Warwick Farm in 1969, below.
Garrie Cooper’s latest big car had a nice, stiff aluminium monocoque chassis but the short wheelbase device, even with Allen at the wheel, very much Matich’s equal in F5000 was never a winning car and with only 480bhp was ‘gutless’ compared to Matich’s 580! Never thought i would say that about a 5 litre injected Chev!
(oldracephotos.com)
Bob Jane below in the sensational McLaren M6 Repco at Hume Weir in 1969, le patron at the wheel of the car raced mainly by John Harvey including the Australian Sportscar Championship in 1971/2. Also Repco powered but ‘only’ an SOHC 5 litre ‘740 Series’ V8, Harvey was very much an ace but the car not on the same page as Matich’s beastie. Its time would come…but only after SR4 was popped away as a museum piece within months of its championship win.
(oldracephotos.com)
Don O’Sullivan in the hi-winged Matich SR3 ‘3’ Repco slicing into Warwick Farm’s Esses in early 1969. Behind him is Niel Allen in the ex-Matich Elfin 400/Traco Olds, now 5 litre Chev engined car. The chassis of the SR3 was either identical to or very, very similar to Cooper’s Elfin 400 design.
(oldracephotos.com/Dick Simpson)
Matich Cars: The Chassis List…
Matich listed ‘his cars’ by chassis number as below. After discussion with Frank Matich, Darryl Duff who owned one of the SR3’s at the time in the early eighties prepared a document listing ‘Franks’ sportscars. A truncated summary of it is set out below. To that I have added Matich’s single-seaters, all F5000’s the source, Derek Kneller, his engineer/mechanic throughout the entire F5000 period;
Matich in SR3 ‘3’ Repco ‘620 Series 4.4 litre V8, the last one built, at Warwick Farm in 1968, this is the chassis with which he belted Chris Amon in the ’68 Tasman support rounds, Amon in David McKays/Scuderia Veloce Ferrari P4/Can Am 350 (Dick Simpson)
1.Sports Cars: All of multi-tubular spaceframe construction
#1 Lotus 19B Climax: (the second of FM’s 19’s, highly modified with many Brabham bits and ultimately destroyed in FM’s big ’65 Lakeside shunt)
#2 Elfin 400 Olds: (aka ‘Traco Olds’ first raced Sandown early ’66, still exists)
#3 SR3 (1) Olds/Repco (still exists) Built with 5 litre Traco/Olds, ZF 5 DS-25 ‘box
First race Warwick Farm early ’67, won ’67 Victorian (Sandown) and NSW (Catalina Park) sportscar championships and Australian Tourist Trophy at Surfers Paradise. To Marvin Webster, California, sans engine in June 1967. Tony Settember raced the car for Webster.
#4 SR3 (2) Repco (still exists) RBE ‘620 Series’ 4.4 litre V8 # ‘RB620E22’, from late 1969 Traco/Olds 5 litre from ex-SR3 (1), ZF DS25 ‘box
Built, sold and exported to Kent Price, California US, first raced 3 September 1967, Road America, Elkhart Lake by Matich. Its only US race. Returned to Oz, it was sold on Price’s behalf, by Matich to Malcolm Bailey in 1969. Bailey fitted the ex-Elfin 400/Traco Olds/ SR3 (1) V8 from Niel Allen to the car.
First race by Matich, 17 September 1967 Bridghampton, raced in Oz later in ’67. Won RAC Trophy and Australian Tourist Trophy at Warwick Farm and Mallala respectively in 1968. This is the chassis which beat Amon’s Ferrari P4/CanAm 350 throughout the ’68 Tasman support races. Sold to Don O’Sullivan late in ’68
#6 SR4 Repco: (still exists, ’68 intended CanAm contender, late, only raced ’69 in Oz, won ASSC that year)
#7 SR4B Ford/Lotus twin-cam (still exists, customer car built for John Wood)
Matich A51 Repco on the Watkins Glen pit row in 1973 (D Kneller)
2.F5000’s: All aluminium monocoques
Note The Matich Team reskinned their McLaren M10B Repco tub after its Oran Park 1971 practice shunt, their first monocoque experience. Six virtually identical tubs were built by Matich/Commonwealth Aircraft Corporation and built up as follows;
#8 A50 Repco Chassis # ‘001/002’ (1971 AGP and 1972 Gold Star winner, still exists)
#9 A50 Ford # ‘003’ (exported to the US, bits incorporated in sportscar) 1972
#10 A50 Repco # ‘004’ (customer car, John Walker ’73 US L&M later to Jon Davison, still exists)
#11 A51 Repco # ‘005’ (US ’73 L&M Series sold to J Goss, converted to A53 spec, ’76 AGP winner, still exists)
#12 A51/52 Repco # ‘006’ (US L&M Series as A51 converted to A52 spec back at Brookvale in time for the Surfers Gold Star round that September, destroyed in a Warwick Farm testing accident shortly thereafter driven by Bob Muir, scrapped)
#13 A53 Repco # ‘007’ (’74 Tasman car sold to J Goss after FM retirement, still exists)
On the basis of the above the Matich Team built 11 cars; the list above less the Lotus 19B and Elfin 400 which were built in Cheshunt, London and Edwardstown, Adelaide respectively.
FM’s logic of including the Lotus and Elfin as ‘his cars’ is not spelt out in Duff’s document but I suspect FM’s thinking was that he modified the cars to such an extent that they were more ‘Matich’ than Lotus/Elfin which may be true of the Lotus but ‘praps not the Elfin… Both these cars are covered in my ‘Elfin 400’ article the link of which is early in this article.
In Period Race Footage…
SR3.
SR4.
Shot below by Dale Harvey and is at Catalina Park in the Blue Mountains, not Warwick Farm.
Etcetera…
Racing Car News June 1968 (Dalton)
Racing Car News cover July 1968 (Dalton)
1970 shot of FM in natty check strides, Vicki Fry and journalist and later motor racing publisher, Chevron Group founder Ray Berghouse. Hewland box missing, nice shot of suspension detail (Ray Berghouse)
Special Thanks…
To Nigel Tait for entrusting me with his manuscript
Derek Kneller for his recollections of the 1969/70 period at Team Matich
Credits…
Nigel Tait Collection, Dick Simpson, oldracephotos.com, Repco Ltd, Dave Friedman Collection, Ian Pope, Jay Bondini, The Roaring Season, Derek Kneller, Dale Harvey, Peter Ellenbogen, Stephen Dalton Collection, Ray Berghouse
Tailpiece: Matich is his local ‘backyard’, aboard the SR4 Repco, Warwick Farm’s Esses, now ‘Bell Star’ equipped, 1970…
Jackie Stewart’s BRM P261 is pushed onto the Longford grid by Jimmy Collins and Stan Collier on 5 March 1966…
The race is the Launceston Examiner Trophy, the preliminary Longford Tasman round race, and Jackie is being moved onto pole.
Stewart won the main race, the South Pacific Trophy on the Monday from his teammate Graham Hill and Jack’s Brabham BT19 Repco- the new Repco ‘620 Series’ V8, 2.5 litres in Tasman spec, having its third race and gearing up for his successful world championship assault that year.
For the BRM boys it would be a more character building F1 year, mind you, Jackie took a great Monaco GP win in his nimble 2.1 litre P261 against the new 3 litre GP cars that May.
Stewart glides his BRM into Mountford Corner. Note the crossflow ‘inlet between the Vee’ spec of this P60 engine- the more ‘typical’ engine had the exhausts within the Vee (oldracephotos.com.au/DKeep)
The 1966 Tasman Series was a BRM rout.
The 1930cc P60 versions of the 1.5-litre P56 V8 engined cars won seven of the eight rounds- JYS took four victories and the title (Wigram, Teretonga, Sandown, Longford) Graham Hill two (NZ GP Pukekohe, AGP Lakeside) and Richard Attwood one (Levin). Jim Clark won the other round, the ‘Warwick Farm 100’ in his Climax FPF-engined Lotus 39.
The days of a Coventry Climax FPF winning the Tasman were over. From 1966 to 1970 the 2.5 Tasman Series was dominated by ‘multi-cylinder’ V6 and V8 engines of F1 and F2 extraction.
JYS and Eric Reece, Tasmanian Premier (HRCCT)
Lindsay Ross of oldracephotos captured the feeling at the time, ‘After his win at Longford in 1966, a lot of Tasmanians were now aware of Jackie Stewart and I, along with no doubt many other enthusiasts, began following his career.’
‘The podium shot has him shaking hands with Tasmanian Premier ‘Electric Eric’ Reece, who was the driving force behind Hydro-Electric power in the state. He also made sure the Longford roads were laid with the finest hot mix bitumen available. Ron MacKinnon of the Longford Motor Racing Association has the microphones- he owned much of the land around the Longford track.’
Jim Clark, Lotus 39 Climax in front of his fellow Scot at The Viaduct in 1966 (oldracephotos.com.au/DKeep)
Etcetera…
(HRCCT)
Brabham accelerates away from Mountford in BT19, surely the most photographed single-seater in 1966. The chassis was Brabham’s weapon in Tasman and GP competition pretty much all year.
Note the long inlet trumpets of the RB620 2.5-litre V8. Longford was the new RB620’s third race- a 3 litre unit was used in the non-championship South African GP at Kyalami, and another of 2.5 litres in capacity for the Sandown International in Melbourne the week before Longford. All three events in BT19- BT19-1 is still owned by Repco.
(HRCCT)
The next group of shots are all on the exit of Mountford- the corner onto the straight past the pits, here Clark’s Lotus 39 FPF from Hill’s BRM. The BRM’s solo are #2 Hill and #3 Stewart.
(HRCCT)(HRCCT)(HRCCT)
And another podium shot from a slightly different angle.
Stewart wheels his BRM into the left-hander under the famous Longford Railway Viaduct- a tricky, fast on approach, downhill corner with minimal run-off area should the pilot goof. Note the spectators on the hill and alongside the railway line at the top.
Evocative shot of Bill Pitts’s Jaguar D Type leading David McKay’s Aston Martin DB3S at Queensland airfield circuit, Lowood in 1957…
The January 1958 edition of ‘Australian Motor Sports’ covered ‘The Courier Mail’ Tourist Trophy Race Meeting in detail, the event held in typically hot Queensland November weather.
There were events for motor cycles as well as cars, open-wheelers both under and over 1500cc, touring cars and of course sports cars.
Star entries for the TT were the 2 Aston Martin DB3S’ of David McKay and Tom Sulman both back from Europe having campaigned Astons there. Bill Pitt was entered in the D Type Jaguar owned by local Jaguar dealers, Cyril and Geordie Anderson the balance of the entry Porsches, Triumph TR2 and TR3 and a large number of MG’s, for so many years the ‘backbone’ of Australian Motor Racing entries.
The TT was of 30 minutes duration with a compulsory pitstop to add interest and confuse spectators in this pre-digital sign age, with a Le Mans start.
McKay took an early lead from Pitt and Sulman but McKay spun twice in the first half of the race, once at ‘Mobilgas’ and once on the fast right hand elbow out of the same turn’…McKay foolishly tried to pass the D type here and once again misjudged and spun badly to the outside of the corner. He ended up only feet off the outside fence.
Pitt held the lead from McKay both taking their compulsory pitstop on Lap 9, David’s stop was the better of the two, McKay regained the lead from Pitt and Sulman he held to the end ‘Pitt drove impeccably but the gap was too great to bridge…McKay was lucky to win and undoubtedly the pitstop was the deciding factor. However it was part of the race conditions and the best car and driver team won’ AMS reported.
I will write about the Aston Martin DB3S’ in Australia soon.
As is so often when i start researching a topic i find bits and pieces which alters my original intent!, in this case a lot of information about Bill Pitt, a driver i was aware of but knew nothing about. This article is therefore in three parts;
.Short history of ‘XKD526’
.Reproduction of an article, slightly truncated, about Bill Pitt written by Les Hughes, which was originally published in the ‘Australian Jaguar Magazine’ in July 1987
.Short piece on the Lowood circuit.
Bill Pitt at Lowood in 1957, car repainted bronze after its 1956 Albert Park accident. (Dick Willis)
Pitts Jaguar ‘XKD526’ was bought new by Cyril and ‘Geordie’ Anderson, longtime Jaguar enthusiast, occasional racing driver. It was a 1955 customer car, arriving in Australia in early 1956, Pitt chosen as the driver.
The D was very successful over the next 4 years including finishing 2nd in the 1957 Victorian Tourist Trophy at Albert Park and in the hands of Frank Matich when sold by the Andersons.
Bill Pitt, left, pondering the Jags performance at Lowood in 1957. (Dick Willis)
A summary of its race history is as follows; December 1955 car arrived in Australia; 30/1/56, Strathpine, Mrs Anderson, clocked at 120mph over flying quarter, still in 3nd gear!; 19/2/56, Leyburn sprints, Mrs Anderson, clocked 135.2mph over flying quarter, setting a state record.
March, Strathpine; Bill Pitt became the cars regular and very successful driver; 1956 race meeting at Lowood; gearbox problems precluded competition for 5 months; August, Lowood; New South Wales Road Racing Championships, Bathurst, 2nd to Stan Jones driving a 250F Maserati; Lowood TT, 1st.
Australian TT, Albert Park Olympic meeting, Melbourne, 4th. At the Argus Cup meeting at Albert Park the following weekend, the meeting a ‘double header’, Pitt rolled car and was thrown out. The D was badly damaged and trailered back to Brisbane being completely rebuilt, painted bronze, with squared-off mouth and air vents in the bonnet. Its first race post repair was back at Albert Park in March 1957 for the Victorian TT, finishing 2nd.
XKD526 was repainted BRG; raced at Lowood and Bathurst, in 1958 it raced at Orange, Lowood, Bathurst and Albert Park and in 1959 raced at Bathurst and Lowood before being sold in late 1959 to Leaton Motors, a sports and performance car dealership in Sydney.
Bill Pitt negotiates Hell Corner, Mount Panorama, date unknown (P Cross)
The car was repainted yellow with black stripe and driven initially by Frank Matich and later by Doug Chivas. In 1961 it was fitted with an aluminum fastback hardtop to enable it to compete in GT racing. Matich competed in June at Catalina Park, he contested in July the Australian GT Championships at Warwick Farm finishing 1st. In October he won the NSW Championship. Doug Chivas raced the car at Warwick Farm in November, by that stage Matich was driving Leaton’s just imported Lotus 15 Climax.
The car was sold to Barry Topen who competed in the March 1962 Warwick Farm International Meeting before racing in Sandown Park’s inaugural meeting, crashed it and damaging it. The D Type remained in a damaged state for some time and was sold around 1965 to Keith Russell (Sydney), who rebuilt it and raced occasionally during 1966 at Catalina Park, Warwick Farm, Hume Weir and Oran Park.
In 1967 Russell sold to it to Keith Berryman. The hardtop was removed and stored, Keith raced the car occasionally until 1970. In the mid-seventies he loaned it to lan Cummins to assist with his rebuild of ‘XKD510’. ‘XKD526’ was rebuilt by Cummins/Classic Autocraft at the same time, work included re-skinning the monocoque and making a new front frame. In 1982 the rebuild was complete, Berryman retained the car until it was sold at auction in 2015, at which point, the car, its whole history in Australia, left our shores.
Matich leaniang against the back of the car, Australian TT, Longford Tasman meeting March 1960. #32 John Ampt, Decca and Derek Jolly’s Lotus 15 Cliimax to his left and back. (Kevin Drage)
One of the most surreal sights I can recall was after buying a Ralt RT4 (the ex-Moreno Calder AGP winning RT4 ‘261’) off Keith Berryman some years back and travelling from Melbourne to a tiny little hamlet called Stockinbingal in the South Western Slopes area of NSW.
The place is a very small farming community, the nearest large town Gundagai 80 kilometres away. Having done the deal on the Ralt I asked to see the D Type.
We walked through some parched, brown paddocks amongst the sheep near the farmhouse to an unprepossessing run down concrete shed of uncertain vintage.
Keith threw open the door and there, sitting on axle stands inside a ‘huge plastic humidicrib’ an electric motor quietly humming as it circulated clean, fresh air around ‘the baby’, was the fabulous, immaculate, curvaceous flanks of a British Racing Green Jaguar D Type.
To say that it looked out of place does not do justice to the bizarre, surreal scene!
The car lived in country NSW for a long time, Keith a passionate owner for decades…hopefully it will come back to visit one day…
Matich in the 1960 ATT Meeting at Longford. (oldracephotos.com)
Bill Pitt: by Les Hughes ‘Australian Jaguar Magazine’ 1987…
Born in Brisbane, Bill served in the Australian Navy during the Second World war, his first contact with motor racing was as a timekeeper during the Australian Grand Prix meeting at the Queensland Leyburn track in 1948.
From the Leyburn meeting on, all forms of motor sport became a passion for Bill, his friends and later his family. He became a competitor with increasing success and played a vital part in the direction of motor sport both in his Queensland base, and later on a national level. His friend Charlie Swinburn and several other MG drivers formed an active group and later Bill, Charlie and Ray Lewis had a motor garage called LPS Motors where their cars and other racing machinery were prepared.
Pitt’s first competition car was a humble 1938 Morris 12 Roadster, which provided his first trials win. Next came a serious racing car in the form of one of the revolutionary rear-engined Coopers. The Cooper had been recently imported by Les Taylor who had just stunned the motoring world by running his brand new XK120 from Darwin to Alice Springs in under 11 hours. Actual travelling time for the 954 miles was completed at over 100 mph, the final corrected speed was 90.62 mph which allowed for stops for fuel, kangaroos and other wildlife. Taylor sold some of his property, one of the items for sale was the Cooper which Bill bought, fitting it with a Manx Norton Engine.
The engine which Bill bought came via the Queensland Manx Norton distributor, Cyril Anderson, a former international dirt bike racer. Cyril’s other business interests included Mack Trucks, Western Transport and several motor car distribution networks, including Jaguar cars which sold under his Westco Motors banner. Cyril’s wife Doris – better known as ‘Geordie’ – made a name for herself by racing their aluminium bodied XK120 (chassis no 11).
The Anderson XK120.
That first contact through the purchase of the Manx Norton engine led to Cyril’s inviting Bill and Charlie Swinburn to partner Geordie in their XK120 Fixed Head Coupe (their earlier aluminium XK120 had been destroyed in a workshop fire) which he had entered in the first, and only, 24 hour race in Australia, to be held at Sydney’s Mt Druitt circuit (31-Jan-1954).
Despite having to replace a cracked carburettor with one from a spectator’s car, their XK120 won the race against entries including a Jaguar C-Type, Aston Martin DB2, aluminium XK120, Bristol 400, Alfa Romeo 6C. This win gained an enormous amount of publicity for Jaguar, Westco Motors and the three drivers.
Bill was then working for the Queensland Nuffield distributors, Howard Motors, and had married Sherry.
Bill and Charlie then set up the running of the 1954 Australian Grand Prix through the streets of Southport on the Gold Coast. Bill entered his second Cooper, bought from Jack Brabham. The race contenders were Stan Jones, Maybach, Lex Davison’s HWM Jaguar, Rex Taylor’s Lago Talbot and several Ferraris.
For this race Cyril Anderson had stripped the body of a black XK120, shortened the chassis, over which he then placed an aluminium body. Known as the Anderson Special, he entered the car for himself, whilst Geordie was to drive the XK120 FHC in a support race.
Saturday practice proved to be very bad indeed. Bill blew the engine of the Cooper, Cyril was very slow and uncertain of the Jaguar Special, and Geordie had an accident, hit a tree and the FHC burst into flames! As a result Cyril asked Bill to take over the Jaguar Special for the Sunday race.
Bill readily accepted, but as he sat on the grid he was trying to become familiar with a car he had never sat in before – not the most comforting way to begin a Grand Prix. After spearing off at over 100 mph at the end of the straight, rejoining only to have to stop and replace a deflating tyre, he was classified 12th. Lex Davison’s HWM Jaguar won.
Bill’s employer, Howard Motors, used his sporting talents also, and for the 1955 Redex Trial they entered a Morris Oxford for Bill, Dick Howard and Bill Anderson.
D Type ‘XKD526’
The major decision for Bill and Charlie Swinburn in 1955 though, was whether or not to take up the offer from Cyril Anderson to become partners in ownership of a brand new D-Type.
In Melbourne, Bib Stillwell, racer and Jaguar dealer, had placed an order for one through Jack Bryson. After long and careful deliberation, Bill remembers he and Charlie parted with 2,000 pounds each for the car. As it turned out, Charlie never drove the D-Type, and Geordie did only briefly. Virtually all of the competition was done by Bill. He recalls the friendly rivalry between he and Stillwell, they stayed at each other’s homes when interstate.
Bill rolled the D-Type in Melbourne at the 1956 Olympic Games meeting at the very fast Albert Park Circuit. The ‘greats’, included Stirling Moss, Jean Behra and Ken Wharton, were out from Europe with their latest machinery.
Bill Pitt in XKD526 – Albert Park, Melbourne 1956
For Bill Pitt the competition was fierce against Bib Stillwell, and in that near fatal race, Stillwell got the jump at the start and lead Bill into the fast, first left-hand corner. He recalls how he closed quickly under braking into Melford Corner before realising he had gone into it far too fast. The car was still under control, and as he continued the power slide and concentrated on the short burst into the next corner, suddenly it was all over before he knew what had happened. As the D-Type slid wide, and the power was applied, the back wheel touched the stone curbing and at those speeds the car simply twisted into the air and slammed down on its back.
As the beautiful green D-Type lay upside down the scattered hay bales caught fire and quickly spread to the car. The marshals were convinced that Bill was squashed under the car, but couldn’t right it till the fire was out. When that was done, and the car was back on its wheels, they were shocked to find the cockpit empty. Bill was thrown out while the car was in mid air, and in a state of shock, and worry about Jack Brabham’s Cooper which was following, he jumped a six foot wall of hay bales unseen by officials.
The damaged D-Type was returned to Brisbane for a rebuild which was completed in time to return to Melbourne for a meeting in February the following year, this time painted bronze (only for a short while).
In the pits. Albert Park 1957. Painted bronze after the rebuild following crash the previous year. (Ian Richardson).
Leading a 300S Maserati around Golf Course Corner, Albert Park, 1957.(Ian Richardson)
The D-Type was sold in 1959 to Leaton Motors, the history of the car from that point outlined above.
Keith Berryman (and family) with XKD526 at the 1988 Gold Coast Jaguar Rally, together with the excellent replica built by Classic Autocraft for Don Biggar (now owned by Frank Moore)
Jaguar Mk VIII Rally Car.
Bill was approached by Anderson to drive a Jaguar Mk VIII automatic in the 1957 Mobilgas Round Australia Trial. Geordie would partner him, and so too Jimmy Abercrombie, workshop foreman at Westco.
The big cream and grey Jaguar was shipped to Melbourne for the start on August 21, 1957. A field of 94 entrants competed in this, the last of the major round-Australia trials of the era. The toughest opposition came from the all conquering Volkswagens of previous winners, Eddie Perkins, (Larry Perkins father) Laurie Whithead and Greg Cusack, whilst Porsche entered three cars. An automatic had never finished the event, let alone a Jaguar, or even a car as big as the Mk VIII.
The Volkswagen of Laurie Whitehead was the victor ahead of five more Volkswagens, but sensationally, next came the huge Jaguar automatic in seventh place outright, making what Bill Pitt still believes is one of Jaguars greatest competition triumphs, but which outside Australia, was virtually unrecognised. Of the 94 starters, 52 cars finished. Geordie was awarded the Woman’s Prize, and the Jaguar was first in Class D (over 2500 cc), giving the team the total prize money of 760 pounds.
Touring Car Racing.
Lofty England dissuaded the Brisbane team from buying a Lister Jaguar, suggesting to them that he would build a ‘works’ specification Mk 1 3.4 saloon. When Bill and Cyril ordered the 3.4 they didn’t know that David McKay was having an identical car built to replace the less modified ‘Grey Pussy’.
By the time both had their new cars, Ron Hodgson had bought the first McKay machine. Crowds flocked to see the Aussie Holdens take on the best of British, firstly the Jaguars, then the Mini Coopers and the Lotus Cortinas, and that set the scene which was later taken over by the Ford versus Holden halcyon days of touring car racing in Australia.
Bill Pitt and the British Racing Green ‘Mk 1’ were star attractions everywhere they went, and soon the Geoghans bought the Hodgson ‘Mk 1’. Hodgson built a brand new Mk 2 and then Bob Jane arrived with his famous white Mk 2. Bill won many titles and important races, his second place to David McKay in the very first Australian Touting Car Championship, and then his own victory in the second title (1961) were the highlights.
The life of the saloons was much shorter than the old D-Type, however, and with the arrival of the big US V8’s, Bill could see the writing on the wall and in 1962 the car was sold.
Bill’s racing career was over, although he continued to work within CAMS, and for Westco Motors until 1965.
Confederation of Australian Motor Sport.
Bill Pitt was involved in many facets of motor sport from the outset, and as Queensland delegate to the Confederation of Australian Motor Sport (CAMS) he put a lot of time into the betterment of the sport.
Retirement.
It was not until Lofty England’s first visit to Australia in 1981 that the two met for the first time, despite the many phone calls and letters exchanged during their racing and business contacts. Bill and his wife Sherry now live on the Sunshine Coast, north of Brisbane. Australian motor sport, and the Jaguar marque in particular, owe a great deal to this quiet, unassuming and very pleasant man.
Bill and Geordie meet again – March 1993
Bill Pitt at Queensland Raceway GTP Nations Cup Race meeting. 22nd July 2001.
Celebrating 40 years of the Jaguar E-Type and 40 years since his Touring Car Title.
Lowoood Airfield was built on 620 acres 43 miles from Brisbane, construction commenced in September 1941…
Australian and American Squadrons operating Tiger Moths, Kittyhawks, Avro Ansons, P39 Aerocobras and Beauforts operated from there from 1942 to late 1945.
Lowood’s use from motor racing commenced after the war but continued pressure from local religious groups lead to its disuse on Sundays…despite this many meetings were held from 1948-52, in late 1956 the Queensland Racing Drivers Club acquired the land.
The QRDC sold the track in 1966 moving its operations to Lakeside, the area was then subdivided into small farms, what was the main runway is now a local road!
Peter Dunns ‘Australia at War’ ‘Australian Motor Sports’ January 1958, Article by Les Hughes in the July 1987 issue of ‘Australian Jaguar Magazine’, Stephen Dalton for the research and archival material
Photo Credits…
Heinz Federbusch Archive via Dick Simpson and The Nostalgia Forum, Kevin Drage, oldracephotos.com, Dick Willis, Ian Richardson, Paul Cross
Stirling Moss cruises his works Maserati 300S chassis #3059 through the Albert Park paddock prior to winning the Australian Tourist Trophy on 25 November 1956, he repeated the dose in a 250F in the following weekends Australian Grand Prix…
One of the wonderful things about this internet thingy is the number of unseen photos of our sport which pop up from time to time giving people like me something to write about. And so it is that Sharaz Jek recently posted photos his father took as a paying-punter at the Australian Grand Prix carnival at Albert Park held during the Olympic Games.
It would have been more considerate had he posted them six months ago when i first wrote about the two Maser sportscars brought to Australia as part of a five car team by Officine Maserati!. But hey, it gives me a chance to write about the ATT specifically, click here to read the earlier article, i won’t repeat the background or destiny of the two 300S’ which stayed in Oz post event;
I wasn’t born in 1956 but its fair to say i was more than a twinkle in my parents eyes, so i didn’t attend the mid-fifties Albert Park meetings which older enthusiasts speak so fondly about. Running around the lake last weekend i reflected on how little Albert Park had changed but also how much Melbourne had, the skyline of the city a short 2 Km away.
In 1956 Melbourne’s population was circa 1.5 million people, now it’s 4.7 million, the war ended only a decade before and with it successive Australian Governments established an aggressive migration program which provided, and continues to provide us with the wonderful, peaceful mix of people and their cultures which makes this such a special country and city in which to live. Disgraceful offshore detention centres notwithstanding!
The ’56 Olympic Games, held from 22 November to 8 December was an important part of opening our society to other cultures and equally allowed us to showcase our country, city and capabilities to the world.
The same can be said about the 1956 Albert Park International race meetings and their impact on Australian motor-racing; Barry Green in his wonderful book ‘Albert Park: Glory Days’ said; ‘The weekend was the proverbial moment which changed the face of motor racing in this country. Here for the first time we had a current works sports car and F1 team and other leading international drivers in ex-factory cars; their presence prompting the best of the locals to upgrade their machinery, spend even more and charge harder. A world class field deserved a world class venue and world class crowd. And in the picturesque Albert Park and thousands of international visitors filling Melbourne to overflowing for the first Olympic Games to be held south of the equator, it had just that’.
So, to put you in the zone of the times before reading this piece I have added some photos of Melbourne in 1956 to give you the ‘feel of the joint’ and flavour of the times six decades ago, the racing stuff is after that if you wish to cut to the chase…
The ‘Eyetalians’ brought their weird steaming coffee making machines with ’em post-war, the local coffee obsession was underway, school below is Melbourne High in South YarraTV was introduced to Australia in the lead up to the games, here some locals are sussing the weird new contraption in the window of ‘Myers’ department store in Bourke Street‘Sultry beauty Gunhild Larking, 20, Sweden’s entry for the high jump pensively awaiting her turn to compete’ is the caption. A post sporting career in modelling or TV awaits d’yer reckon!?
The first weekend of the two week AGP carnival comprised four events, the feature the Australian Tourist Trophy for Sports Cars was held on 25 November…
A convoy of Maserati mechanics drove the 250F and 300S, the 5km from Australian International and 250F driver Reg Hunt’s Elsternwick Holden Dealership, where the cars were maintained each day to Albert Park, on the Nepean Highway and St Kilda Road. Not too much of a problem then but guaranteed to boil a Maserati 300S sans radiator fan these days!
Behra and Moss @ Albert Park in 1956, the first and only time, sadly, Behra raced here but Moss was an annual, usually victorious visitor to Oz till the end of his career in the Masers, then Rob Walker entered Coopers and Loti (Graham Hoinville)
Most of the drivers stayed close by in the ‘Espy’, the Esplanade Hotel in St Kilda, it’s still there if you want a ‘bevvy’ during the AGP carnival and is well known to Australians as the home of the ‘RocKwiz’ music quiz show.
Fitzroy Street St Kilda felt exotic and buzzed with thousands of visitors from all over the world eager to explore the local delights of the bayside suburbs restaurants and bars. They were full of people including recent European migrants eager to get a touch of home for a few hours at least. The Espy and Tolarno’s were ‘chockers’ and no doubt the proprietors of the areas ‘red light’ precinct did good trade.
Guerino Bertocchi, Maserati chief mechanic and factory test driver and his helper start the 5 Km journey from Albert Park to Reg Hunt’s Elsternwick Holden dealership where the team were based (Arnold Terdich)Maserati’s as far as the eye can see! Masers brought 5 cars to Oz, 3 250F’s (one unraced spare which at one stage looked as tho it may have been raced by Brabham but ’twas not to be) and 2 300S, Reg Hunt Motors, Nepean Highway, Elsternwick (Eileen Richards)
In ’57 the factory 300S’ were campaigned by Moss, Behra and Piero Taruffi taking wins at Silverstone, Nassau, the Nurburgring, Rouen and Buenos Aires; the works allocated # 3055 to Behra and # 3059, the ‘featured car’ here to Moss. Stirling was in sparkling form having won the Venezuelan Grand Prix in Caracas a fortnight before arriving in Melbourne, Behra also contested the race.
There was a strong entry for the ATT of around 36 cars; Peter Whitehead returned to Australia hoping to repeat the success of his 1938 tour which culminated in an ERA Bathurst Australian Grand Prix win for him.
His entry in the ATT was a Ferrari Monza, similar cars were entered by Brit Peter Wharton and local motor dealer Stan Coffey. The Whitehead and Wharton Ferrari’s were garaged at AP Hollins in Malvern where Lex Davison’s mechanic/engineer Alan Ashton, well familiar with 4 cylinder Ferrari’s (Davison raced the ex-Ascari Tipo 500/625) could keep a close eye on them.
Lex, already the winner of one of his four AGP’s in 1954, entered his HWM Jaguar, his Ferrari was raced in the AGP won by Moss’ 250F the following weekend.
Stan Coffey’s Ferrari 750 Monza, of earlier vintage than those of Wharton and Whitehead but still quick if tricky to drive (John Blanden)
Jaguar D Types were entered for Kew motor dealer and later multiple Australian Gold Star champion Bib Stillwell and Queensland’s Bill Pitt driving the Mrs Anderson owned car.
Jack Brabham returned from Europe where he was establishing a strong reputation to drive a Cooper T39 ‘Bobtail’ Climax with future Gold Star Champion Bill Patterson, another Melbourne, Ringwood, Ford dealer in a similar car.
Jack refuels the Cooper T39 in the Albert Park paddock. ‘COR’ is Commonwealth Oil Refineries soon to be BP (John Blanden)
Veteran Tom Sulman raced his ‘Kangaroo Stable’ Aston Martin DB3S, the quicker entries rounded out by Austin Healey 100S’ for multiple AGP winner Doug Whiteford and Ron Phillips.
Moss positions his Maser on the front row of the ATT grid, Behra started on pole. Such a sexy shape . Properties on Canterbury Road near the Mills Street corner in the distance (Sharaz Jek)Behra’s 300S gets the jump at the start, thats Whitehead’s Monza at left, Moss 300S slightly behind, the Jag is Stillwell’s D at left and the little car on the far right Brabham’s Cooper T39 (John Blanden)
A fantastic crowd of 150,000 people gathered to watch the days racingwhich was marred by the critical injury and subsequent death of Peter Catlin in the first race of the day after he lost control of his Bugatti at Melford corner.
This dominated the tabloids coverage of the race but ‘The Argus’ noted Moss’ lap record of 1:55.8 ‘set in a sportscar, the record previously held by a racing car’ and ‘one of the finest exhibitions of race driving seen in Melbourne’.
To the surprise of many Behra put his car on pole and lead from the start of the 100 mile race with Patterson flipping his Cooper at Melford Corner without too much damage to him or the car on the first lap.
Behra hard on the brakes in pursuit of Moss. Maser 300S (Philip Skelton)
Behra lead the other 35 competitors at the end of lap 1 from Moss, Stillwell’s D Type, the two Monza’s of Wharton and Whitehead, Brabham’s Cooper T39, Bill Pitt’s D type and Paul England’s beautifully designed Ausca. The car was built by England in his spare time at Repco, was powered by the first Holden/Repco Hi-Power cylinder head engine.
Pitt’s Jag D chasing Jim Leech’s MM Holden Spl with the Ron Phillips Austin Healey 100S behind (unattributed)
On lap 2 Moss gave his French teammate a blast on his Masers ‘Fiamms’ at Jaguar Corner to let him through, and an even bigger one when he did so, team orders not new in motor racing! At the front Wharton and Brabham slipped past Stillwell with Bill Pitt getting progressively quicker in his XKD and closer to the shapely tail of Whitehead’s Monza.
Brabham wringing the little Cooper T39’s Climax engine hard! (John Blanden)
Moss had a lead of 20 seconds from Behra, Stillwell spun giving Pitt ‘a sniff’ at him as Moss set fastest lap on the 27th tour, passing lots of slower traffic in the process.
By the race’s end only Jean Behra was on the same lap as Moss, the Brit took the flag from Behra, Wharton, Pitt a great 4th and first local home, Stillwell, Whitehead, Lex Davison’s HWM Jaguar and Kiwi Ross Jenson in an Austin Healey 100S and the rest.
Moss exits Jaguar corner in his 300S complete with accumulated hay from bales disturbed by other errant competitors during the race’ 100 miles, in the cars inlet (Graham Hoinville)‘Motori Porno’ innit!? Plug change, 12 of them for Moss’ twin plug #3059. Twin distributors, big Weber 45DCO3 carbs of the 2992cc circa 280 bhp 6 cylinder, DOHC 2 valve engine all clear (Sharaz Jek)
Other ATT Meeting Photos…
Albert Park vista #20 the Phillips Austin Healey 100S (unattributed)Another start shot, row 3 this time with the 2 D Types of Stillwell and Bill Pitt (right) in shot, thats Sulman’s Aston DB3S on the far right (unattributed)Phillip’s 8th placed pretty Austin Healey 100S, great run for the Melburnian in a model very popular in Oz, sadly most have now left our shores (unattributed)Stan Coffey’s Ferrari 750 Monza behind its Holden FE towcar (Sharaz Jek)Moss passing and thanking with a wave MG T driver Newman for his track etiquette (Arnold Terdich)Ken Wharton’s races his Ferrari 750 Monza to 3rd place. Southern Command Army buildings in the background. He raced this car in NZ that summer and sadly died in it at Ardmore on 12 January 1957 (John Blanden)Bib Stillwell’s ‘XKD520’, the seventh D Type Jag built appropriately going thru Jag Corner. An important step in the later Australian Champs rise thru the ranks, he raced it in ’56 to early ’57 , then progressed to Hunt’s 250F (autopics.com)Another paddock vista which again has ‘COR’ Commonwealth Oil Refineries in shot, clearly the firms PR function was working well! the Phillips Healey 100S and a Porsche Speedster in shot (unattributed)
Etcetera…
Fifties circuit conceptually similar to but not identical to the contemporary one, direction of racing opposite to the present (Barry Green)
Bibliography…
Barry Green ‘Albert Park: Glory Years’
Photo Credits…
Sharaz Jek especially for the shots which inspired the article, Getty Images for all of the Melbourne ‘atmo’ 1956 shots, Arnold Terdich, Eileen Richards, John Blanden, Philip Skelton, Graham Hoinville, autopics.com
Tailpiece: She is MY daughter Stirl don’t even think about it!…
The big cream and grey Jaguar was shipped to Melbourne for the start on August 21, 1957. A field of 94 entrants competed in this, the last of the major round-Australia trials of the era. The toughest opposition came from the all conquering Volkswagens of previous winners, Eddie Perkins, (Larry Perkins father) Laurie Whithead and Greg Cusack, whilst Porsche entered three cars. An automatic had never finished the event, let alone a Jaguar, or even a car as big as the Mk VIII.
Bill Pitt and the British Racing Green ‘Mk 1’ were star attractions everywhere they went, and soon the Geoghans bought the Hodgson ‘Mk 1’. Hodgson built a brand new Mk 2 and then Bob Jane arrived with his famous white Mk 2. Bill won many titles and important races, his second place to David McKay in the very first Australian Touting Car Championship, and then his own victory in the second title (1961) were the highlights.
